REFERENCES
1. Chakrabarthi, S.C., Nayak, G.C. and Agarwala, S.K. “Effect of Sequence of 
Building Frames”, Building andConstruction in the Analysis of Mutistoreyd
Environment, Volume 13, pp. 1-6, 1978.
2. Fintel, M. and Khan, F.R. Effects of Column Creep and Shrinkage in Tall Structures 
- Prediction of Inelastic Column Shortening. ACI J.66, December 1969.
3. Gosh, S.K. “Estimation and Accommodation of Column Length Changes in Tall 
Buildings, Chapter 4, Large Concrete Buildings, B.V.Rangan and R.F Warner eds. 
Longman group limited, Harlow, Essex, England, 1996.
4. Jayasinghe, M.T.R. and Jayatunge P.T.P, “Guidelines for Framed Buildings Braced 
with Brick Wall Infills” , Transactions 1998, Volume 1, Part B, PP.-45-57, The 
Institution of Engineers Sri Lanka.
5. Koutsoukis, M. and Beasley, A.J. “ Idealizing the Construction Cycle of Tali Concrete 
Buildings for Axial Shortening Analysis, Concrete95 conference. Brisbane, Australia, 
1995.
Mendis P.A, “Optimization of Outriggers in Tall Buildings”, 
Department of Civil and Environmental Engineering, University of Melbourne.
7. Ncvil, A.M. “Elasticity, Shrinkage and Creep”, Chapter 9, Properties of Concrete, 4lh 
Edition, 1996.
8. Plewes, W.G. “CBD - 125. “Cladding Problems Due to Frame Movements”, Canadian 
Building Digest, May 1970
9. Plewes, W.G. “CBD - 185. “Failure of Brick Facing on High-Rise Buildings”, 
Canadian Building Digest, April 1977.
10. AS1170.2-1989, “Minimum Design Loads on Structures - part 2: Wind Loads ,
6. Karnam M. and
Standards Australia, New South Wales.
“Concrete Structures”, Standards Australia, New South Wales.11. AS3600: 1994,
12. BS5400 Part4: 1984, Steel, Concrete and Composite Bridges (Code of Practice for
Design of Concrete Bridges.
13. B.S.6399 Parti: Code of Practice for Floor Loads on Buildings
Structural Use of Concrete (Code of Practice for Design and14. B.S.8110 Parti :1997, The
Construction)
-147-
15. B.S.8110 Part2:1985,
Circumstances)
16. B.S.8110 Part3.1985, The Structural 
reinforced beams, doubly reinforced beams and reerangnlar columns)
17. Reynolds, C.E. and Steedman, J.C. “Reinforced Concrele Designers Hand Book", 10" 
Edition
18. Manual for the Design of Reinforced Concrete Building Structures”, The Institution 
of Structural Engineers and The Institution of Civil Engineers, October, 1985.
19. MICROFEAP-n, PI Module, Release 3.3, 1985, “A Module for Static Analysis of 2D 
Truss, Frame and Shear Wall Structural Systems”
The Structural Use of Concrete (Code of Practice for Special
Use of Concrete (Design charts for singly
8 APR 2003
-148-