LIST OF REFERENCES
ICTAD/DEV/15-1997 Guidelines for Interpretation of Site Investigation data for 
Estimating the Carrying Capacity of Single Piles for Design of Bored and Cast In Situ 
Reinforced Concrete Piles
Bowels, J. E. ( 1996), “Foundation Analyisis and Design” ,Fifth Edition, McGraw-Hill 
Co., London, UK.
Goodman, R.E.,Taylor, R.L., and Brekke, T.L,(1968), “A model for mechanics of jointed 
rock”, J. Soil.Mech.Found.Div.,ASCE,vol.94, SM3, pp 637-659.
Horvath, R. G.,Kenney, T. C., and Kozicki, P.(l 983), “Methods of improving the 
performance of drilled piers in weak rock” Can. Geotech. J., vol. 20, pp. 758-772.
Jaeger, C., 1979. “Rock Mechanics and Engineering”, Second Edition, CambridgeUniv. 
Press, Cambridge, UK.
Krynine, P. D., and Judd, W. R. (1957), “Principles of Engineering Geology and 
Geotechniques”, McGraw-Hill Book Co., New York, N.Y. pp.61.
Leung, C.F. (1996), “Case studies in rock socketed piles”, Geotech. Engrg., vol. 27. no. 
1, pp. 51-67.
Osterberg, J.O., and Gill, S. A.(1973), “Load transfer mechanism for piers socketed in 
hard soils or rock”, Proceedings, 9lh Canadian Rock Mechanics Symposium, Montreal, 
P.Q., pp.235-262.
Pells, P.J.N., and Turner, R. M. (1979), “Elastic solutions for the design and analysis of 
rock-socketed piles”, Can.Geotech.J., vol. 16, pp. 481-487.
Poulos, H.G., and Mattes, N.(1969), “The behaviour of axially loaded end-bearing piles”, 
Geotechnique, vol. 19, no.2, pp.285-300.
Rowe, R. K., and Armitage, H. H. (1986), “Theoretical solutions for axial deformation of 
drilled shafts in rock”, Can. Geotech. J., vol 24, pp 114-125.
Soo, S. (1983), Studies of Plain and Reinforced Frozen Earth Structures”, Ph.D. 
dissertation, Michigan State University, USA.
Tennekoon, B.L. (2001), Private communication on “Piling practice in Sri Lanka”.
Tomlinson M. ,and Woodward J., ( 2007 ), “Pile Design and Construction Practice”,
Fifth Edition, Routledge Taylor & Francis Group.
Williams, A. F., and Pells, P. J. N. (1981), “Side resistance rock sockets in sandstone, 
mudstone, and shale”, Can. Geotech. J, vol. 18, pp. 502-513.
Wylhe, D. C.(1992), “Foundations on rock”, First Edition, E & FN Spon, London.
Zienkiewicz, O. C. (1977), “The Finite Element Method”, 3rd ed., McGraw-Hill Co., 
London, UK.