| dc.description.abstract |
Development of a ceramic based cookware body with adequate thermal shock
resistance was successfully developed using low cost raw materials. The objective of this work was to develop a ceramic body composition suitable for cookware to be used in direct flame cooking. To achieve this objective, cookware body should have low thermal expansion coefficient, high strength,
low water absorption and high thermal shock resistance. In this study, ball clay, talc, alumina and zirconium silicate were used as starting raw materials and twenty five samples were investigated with different compositions. All samples were wet-mixed, shaped by slip casting, dried and fired to a temperature of 12500C in an electric furnace. Modulus of Rupture was tested by the three point bending method, the thermal nductivity of each body was measured with Lee’s disk method and the coefficient of thermal expansion was measured by thermo mechanical analyzer. The thermal shock resistance of each sample was calculated with Kingery’s formula. Optimum thermal shock resistance of 0.74 kJm-1s -1 was achieved for a body composition of 45% of clay, 15% of talc, 15% of alumina and 25% of zirconium silicate which was fired to 12500C. Further, modulus of rupture and coefficient of thermal expansion of the ceramic body were 74 MPa and 30.2×10-7 K-1, respectively. These results suggest that the ceramic body is suitable to be used in cookware applications. |
en_US |