Abstract:
Gravity retaining walls derive their capacity to resist lateral movement through the dead weight of the
wall. The design methodologies proposed by standards do not take into account the construction sequences that
simulate the process by which the soil and retaining wall are brought together. However, in reality, at least during
the backfilling process, the retaining wall undergoes many displacements that are not so far considered in the
design. In this investigation, effect of construction sequences in the gravity retaining walls with different shapes is
investigated with the help of finite element method. Two different construction sequences, namely the backfilling
after wall construction and the backfilling parallel to wall construction, are compared for different wall shape
models. Lateral displacement of the bottom and the top of the wall is plotted for each model and construction
sequence with construction stages. Bearing pressure distribution, lateral earth pressure and failure wedge angle are
summarized and compared with design values. Each wall showed different behaviours for each of the construction
sequences. Back filling after wall construction minimizes the sliding failure and bearing pressure. Overturning
failure could be reduced by backfilling parallel to wall construction. However, it was observed that, comparatively,
backfilling after wall construction is effective than backfilling parallel to wall construction, suggesting that proper
selection of construction method also may reduce negative effects on the wall stability.
