Abstract:
Sri Lanka is an island located in the Indian Ocean and it lies in the large Indo-Australian plate seemingly
far away from any of the plate boundaries. Therefore, many people believe that this fortuitous scenario
makes Sri Lanka safe from earthquakes.
But an intra-plate earthquake can occur anywhere at any time. Some geologists pointed out that the Indo
Australian plate is being separated into two and its boundary lies 500km away from the southern coast of
the country. Therefore, Sri Lanka has a moderate risk to face an earthquake.
There are over 4000 bridges on National Road Network with length varying from 3.0m to 500.0m. These
bridges have varying widths about 3.0m to 25.0m and some of these have been constructed more than 50
to 100 years back. They were constructed using steel concrete composite or steel. These bridges have not
been designed for seismic loads and they have not been detailed for seismic effects. Therefore, it is a must
to evaluate the seismic capacity of those bridges and retrofit those if necessary.
This study was focused to develop a priority list (Bridge Rank) for the purpose of further investigation on
seismic capacity. It was also focused to carry out a case study for a selected bridge from the developed
priority list to find out its seismic capacity.
Bridges on the “A” class roads with the overall length of the bridge is greater than 25m were considered
in this study. To develop the priority list for thesebridges, the method given in the “Seismic Retrofitting
Manual for Highway Bridges” published by the Federal Highway Administration (Report No. FHWARD-
94-052) was used. The parameters required to input to the above methodology were obtained from
the previous research findings and the bridge inventory that is maintained by the Planning Division of
RDA, Sri Lanka.
The bridges considered under this study have low risk to fail due to possible earthquake loadings with
local conditions since the bridge rank is between 0 to 24 on the scale of 100.
Bridge No 1/1 on PeliyagodaPuttalam road (Japanese Friendship Bridge) was selected for further
investigation from the developed priority list since it gives the bridge ranking 12. A response spectrum
analysis was carried out to find the actions of the bridge during an earthquake. For the analysis of the
bridge, a Finite Element Model was developed using SAP 2000. Codes of practices for Australian
standards were used to find out the seismic capacities of the substructure and the actions of
superstructure was compared with the originally designed actions.
The bridges considered under this study have low risk to fail due to possible earthquake loadings since the
bridge rank is between 0 to 24 on the scale of 100. It is proposed to replace the bridge bearings of the
bridge no 1/1 on PeliyagodaPuttalam road based on the results of the case study.
