Institutional-Repository, University of Moratuwa.  

Modelling of growth cycle of water hyacinth : an application to Bolgoda Lake

Show simple item record

dc.contributor.advisor Jayaweera, M
dc.contributor.author Fernando, PUD
dc.date.accessioned 2011-06-23T03:59:58Z
dc.date.available 2011-06-23T03:59:58Z
dc.identifier.uri http://dl.lib.mrt.ac.lk/handle/123/1317
dc.description.abstract Water hyacinth (Eichhornia crassipes (Mart). Sohns) is considered as a problematic aquatic weed in many lakes, irrigation canals, stagnant ponds, waterways and semi-wet areas in Sri Lanka. Bolgoda Lake is one of the freshwater bodies in Sri Lanka, which has been severely affected by excessive growth of water hyacinth thereby clogging the water ways and hence adversely affecting water quality. This study was conducted to determine the growth characteristic of water hyacinth under influence of natural, physical and chemical factors in Bolgoda Lake. The parameters considered in the study were as follows: biomass in dry weight, biomass production per day, phosphorus and nitrogen contents in plant tissues, phosphorus and nitrogen contents in the water body, pH, temperature, and salinity. The luxuriant growth of water hyacinth was observed during the study period, which occurred with the temperature ranging between 26-32 °C, pH from 6.67-7.76, salinity from 0-1.5 ppt and water nutrients from 4.6-17.4 mg Nil, 0.18-0.70 mg N03-NIl and 0.14-0.93 mg P/I and 0.02-0.16 mg P04-PIl respectively. Under such conditions, results revealed that hyacinth plants produced a biomass yield of 20 -1800 g dry weight/m' and the number of plants increased from 21 to 412 per m2 for the entire study period of 14 weeks with doubling time of around 13-15 days. The biomass production rate varied from 2.10-75.25 g dry weight/or' per day. Results of heavy metal uptake experiment suggest that rhizofiltration (metal absorption into roots) and phytoextraction (concentrate into the harvestable parts of roots or shoots) are the key mechanisms for removal of heavy metals from the aqueous phase. Phytoextraction was more responsible in translocating heavy metals to aboveground parts in initial few weeks and rhizofiltration became prominent at the later stages in which more metals are bound to below-ground parts. Once the heavy metal binding was complete, harvesting was suggested at the end of the 13th week during which more metals were adsorbed only to root zone. From this study it was shown that there exists a massive proliferation of water hyacinth stands in Bolgoda Lake with a great influence of nitrogen, phosphorus, pH and temperature. However, there has been a significant perishment of the existing stands of the vegetation from time to time due to the exposure to saline waters entering from the tidal action. A numerical model was developed to simulate the growth of water hyacinth in Bolgoda Lake, Sri Lanka. The model was first applied to experimental data from Sato and Kondo, (1981). Secondly, it was used to evaluate the management options to control the growth of water hyacinth in Bolgoda Lake. Model application showed how the model could be used to evaluates the management options to control the growth of water hyacinth and to reduce the available nutrients in the system. These options include harvest strategies (initial density and harvesting interval) and harvest rate. The maximum yield of 329 g / m2 dry weight was obtained when the rate of harvest was analogous to the initial density (at 100 g dry wt/rrr') in that the water hyacinths were harvested at a uniform rate every 20 days. The continuous harvesting is the major objective criteria to remove available nutrients in the water body and to control the excessive growth of water hyacinth in Bolgoda Lake.
dc.language.iso en en_US
dc.subject CIVIL ENGINEERING-Thesis
dc.subject WATER POLLUTION
dc.subject WATER HYACINTH
dc.title Modelling of growth cycle of water hyacinth : an application to Bolgoda Lake
dc.type Thesis-Abstract
dc.identifier.faculty Engineering en_US
dc.identifier.degree MSc en_US
dc.identifier.department Department of Civil Engineering en_US
dc.date.accept 2003
dc.identifier.accno 80524 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record