Abstract:
This research work was carried out to investigate the effect of short nylon fiber on natural rubber based solid tire tread compound. It was also an objective of this work to find the best fiber loading that would produce short fiber-rubber composites of good physical and mechanical properties of vulcanized rubber. A screening procedure was carried out to identify the best fiber content. Natural Rubber based compound was used and Nylon 6 short fibers were used. Length of fiber was selected as around 5 mm and fiber loadings were varied from 1 to 20 part per hundred rubber. The short fibers were taken from the RFL dip nylon cords but an additional dry bonding system was added to the compound to overcome the bonding failures in cutting edges of the fibers. The Physico-mechanical properties, Dynamic properties and Cure characteristics were studied in detail. There is a positive influence on the tearing strength, cut & chip resistance and compression test (load bearing capability) with the increase in fiber content. The tensile strength and elongation properties were negatively influenced with the loading of short fiber. There was no major influence on Hardness and Specific Gravity of the composites with the increase of fiber content. At the low fiber loading, Abrasion resistance, rolling resistance and hysteretic energy loss (Resilience) of composites had positive influence on properties but beyond the fiber content of 3 parts per hundred rubbers, the properties were negatively influenced. The Minimum torque and Mooney viscosity decreased with the fiber loading up to 5 phr but it increased with the further loading of short fiber. The scorch time increased with the fiber loading but there was no major influence on optimum curing time (t90) As such the general conclusion inferred from this study favor a high potential of using short nylon fiber as reinforcing material for tire tread compounds which are used in high load bearing applications in solid tires.
