The objective of this extended abstract is to present Brain e-Learning System -which ^vas developed and tested final year undergraduate project at the department of Electronic and Telecommunication Engineering university ...

Lean is a management philosophy which delivers many benefits such as waste reduction, cycle time inventory reduction, improvement in quality, delivery in time, high customer satisfaction etc. But up to S0% implemented ...

A study was conducted to evaluate the removal efficiency of NH3 and H2S emitted from an industrial waste gas source by biofiltration. Four types of packing material were used and NH3 and H2S in the contaminated air stream, ...

Jatropha curcas oil was found to be a good source for biodiesel the production. The effect of particle size and the temperature of Jatropha seeds on the extractability of oil were investigated in laboratory scale by ...

Control of Electrical appliances from hand tracking is our final year project and mainly based on newly emerging image processing technology. Image grabbed by the camera will be processed by PC and if it is identified any ...

Sounding rockets are the most common medium that are used carry instruments to near space for various types of experiments such as microgravity experiments, upper atmospheric experiments etc. However, due to high acceleration ...

Most often in fractured rock masses, large excavations have an unsupported stand-up times less than the minimum time required to support the roof after the excavation. During past few years a wide variety of dowels and ...

An industrial scale waste gas treatment system was designed and constructed at a Tobacco Processing Factory. The treatment system consisted of three units namely: condenser, scrubber and bio fdter, the latter acting as the ...

This paper describes the comparison of accuracy and performance of two machine learning approaches for visual object detection and tracking vehicles. The first is a neural network based approach. The classification was ...

Shear design equations for reinforced concrete beams are mostly empirical and are based on test results. But some mathematical models have also been developed over the years. The pursuit for a better model which gives a ...