Institutional-Repository, University of Moratuwa.  

Development of solar powered pumping for the integration of rainwater harvested in multistory houses

Show simple item record

dc.contributor.advisor Jayasinghe, MTR
dc.contributor.advisor Witharana, S
dc.contributor.author Sendanayake, S
dc.date.accessioned 2011-07-16T07:02:48Z
dc.date.available 2011-07-16T07:02:48Z
dc.date.issued 7/16/2011
dc.identifier.citation Sendanayake, S. (2007). Development of solar powered pumping for the integration of rainwater harvested in multistory houses [Master's theses, University of Moratuwa]. Institutional Repository University of Moratuwa. http://dl.lib.mrt.ac.lk/theses/handle/123/1668
dc.identifier.uri http://dl.lib.mrt.ac.lk/theses/handle/123/1668
dc.description.abstract Rain water Harvesting (RWH) is an ancient civil practice for more than 4000 years, drawing attention among scientists in recent decades in the light of potable water shortages and water based natural disasters such as draughts and flash floods. It is observed that the domestic service water (SW) usage patterns are uniform for a given scenario, where over 30% of drinking quality water being consumed for non potable uses such as we flushing, for which harvested rain water (RW) could be used. Roof Top Rain Water Harvesting Systems (RTRWHS) suitable for domestic situations are not being widely used due to non-optimizing of the system's highest cost component, the storage facility or the tank. Extensive research has produced a set of generic curves for Water Saving Efficiency (WSE) of a RTRWHS, enabling the selection of an optimum tank size for a given demand. Validation of this for Sri Lanka could provide a valuable design tool. This was undertaken using a prototype where the daily rainfall data was used with selected usages to create a substantial number of data points, which satisfy the generic curves. These data has indicated that the generic curves can be used in Sri Lanka with generally used roof types such as cement fibre and calicut tiles. In multi-story situations energy is needed for pumping collected rain water to end user points. A strategy should be developed to provide an alternative energy solution to mitigate the strain of extra energy consumption to the national power grid and the resultant Green House Gas (GHG) emissions for RWH to be a true component of sustainable development. Sri Lanka being a tropical country, solar power option is pursued as the most desirable alternative energy source. Since solar power also has high capital cost, minimization of energy used while relying on gravity systems also have been actively pursued. Identifying the suitability of positive displacement pumps over centrifugal pumps when connected to photo voltaic power source, a viable and cost effective solar pumping system is proposed to be used as an integrated draw-off device for a potential RWH system to be used in domestic situations en_US
dc.language.iso en en_US
dc.subject THESIS-MECHANICAL ENGINEERING en_US
dc.subject SOLAR SYSTEMS
dc.subject PUMPS-APPLICATION
dc.title Development of solar powered pumping for the integration of rainwater harvested in multistory houses en_US
dc.type Thesis-Abstract
dc.identifier.faculty Engineering en_US
dc.identifier.degree MSc en_US
dc.identifier.department Department of Mechanical Engineering, en_US
dc.date.accept 2007
dc.identifier.accno 91151 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record