Abstract:
There has been an intensive process of urbanization which has brought about need for rapid construction of roads and related infrastructure during the end of the last century. Therefore development of economical road construction methods is a high priority for a developing country like Sri Lanka. Concrete block paving is one of the predominant road construction method used in most of the developing counties due to economic adaptability. This method has also been emerged as a cost effective road construction method suitable for certain local conditions. But in Sri Lanka this technique is yet to be developed to a fully fledge road construction method. This can be attributed to a dearth of the technical expertise and knowledge. As a result, there is a great need to develop knowledge and establish proper methods of block paving suitable for local conditions. The aim of this research is to evaluate the state of support conditions and effective block laying patterns which can be used to improve concrete block paving technology. Prototype concrete block paving model development, support conditions and their improvements were mainly considered in the development stage of this study. Laboratory scale prototype concrete block pavement model was developed and their surface deflection basin was measured with four different arrangements. A three dimensional (3-D) finite element model was developed to measure elastic deflection behavior of concrete block pavement ,with SAP2000 structural analysis software. This Finite Element Model (FEM) was used to simulate field conditions of a concrete block pavement and it was verified with the deflection values observed in the prototype model. The verified software model was used to perform a parametric study in order to determine necessary improvements for weaker support conditions and find effective laying arrangement in the concrete block paving. . Developed design charts and field observations are used to propose subgrade improvement methods for weaker support conditions. Therefore it's recommended' to introduce concrete block laying work for low volume roads which are having subgrade strength higher than 10% (CBR). FEMs were developed to evaluate performance of the laying patterns. Four different block laying patterns were tested against breaking action and vertical loading. Finally it was possible to conclude that herring bond pattern is more suitable for road construction work with better performance.
