Institutional-Repository, University of Moratuwa.  

Time available for compaction of asphalt concrete (TAC) in tropical countries

Show simple item record

dc.contributor.author Nishantha, AMK
dc.contributor.author Mampearachchi, WK
dc.contributor.editor Pasindu, HR
dc.date.accessioned 2022-06-03T08:20:57Z
dc.date.available 2022-06-03T08:20:57Z
dc.date.issued 2017-07
dc.identifier.citation Nishantha, A.M.K., & Mampearachchi, W.K. (2017). Time available for compaction of asphalt concrete (tac) in tropical countries [Abstract]. In H.R. Pasindu (Ed.), Proceedings of the Transportation Research Forum 2017 (pp. 31-32). Department of Civil Engineering, University of Moratuwa. https://uom.lk/sites/default/files/civil/files/TRF%202017_0.pdf en_US
dc.identifier.uri http://dl.lib.uom.lk/handle/123/18096
dc.description.abstract Road sector development is increased rapidly in Sri Lanka after the civil war. Asphalt concrete is most widely used for the construction of roads due to fast construction, durability, and comfortability, construction easiness compared to other materials. The aim of this research is to identify the time available for compaction of hot mixed asphalt concrete in the field, during both day time and night time. The temperature of the asphalt mixture directly affects for compaction process. In this study, measure the time available for cooling of laid asphalt up to 900C for ABC base and existing asphalt roads. The parameters taken are asphalt layer thickness, base temperature, ambient temperature with different mixtures and different types of asphalt pavers. The standard specification for construction and maintenance of roads and bridges (ICTAD) has specified that the breakdown and the intermediate rolling shall be carried out at a temperature not less than 1350C and 1150C respectively. The final rolling shall be completed before the temperature of the mix falls below 900C. In the field, thermocouples were installed in different layer thicknesses of asphalt to measure temperature changes and recorded at five-minute intervals of the same mixture throughout the day. Measurements were taken in different types of mixtures and observed the available time for compaction of HMA. It was found that the cooling rate of HMA is significantly affected the measured parameters and best results were found from 12.30 pm to 1.30pm and also found that lay down temperature below 1350C was not significantly affected to compaction of HMA and need to complete all the compaction process before 900C. In this research found that cooling rate of HMA mixes are significantly affected environmental factors and layer thicknesses of the mixes and also found that first 10 -15 minutes cooling rate is greater. Also found that the binder course cooling rate is greater than wearing course. en_US
dc.language.iso en en_US
dc.publisher Department of Civil Engineering, University of Moratuwa. en_US
dc.relation.uri https://uom.lk/sites/default/files/civil/files/TRF%202017_0.pdf en_US
dc.subject Temperature of asphalt en_US
dc.subject HMA en_US
dc.subject Aggregate base course en_US
dc.subject TAC en_US
dc.subject Asphalt compaction en_US
dc.title Time available for compaction of asphalt concrete (TAC) in tropical countries en_US
dc.type Conference-Abstract en_US
dc.identifier.faculty Engineering en_US
dc.identifier.department Department of Civil Engineering en_US
dc.identifier.year 2017 en_US
dc.identifier.conference Transport Research Forum 2017 en_US
dc.identifier.place Katubedda en_US
dc.identifier.pgnos pp. 31-32 en_US
dc.identifier.proceeding Proceedings of the Transport Research Forum 2017 en_US
dc.identifier.email kamal.prda@yahoo.com en_US
dc.identifier.email wasanthak@uom.lk en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record