Institutional-Repository, University of Moratuwa.  

Systematic ratings of accident prone T – intersections on national highways

Show simple item record

dc.contributor.author Arulrasa, A
dc.contributor.author Mampearachchi, WK
dc.contributor.editor Pasindu, HR
dc.date.accessioned 2022-06-04T08:38:20Z
dc.date.available 2022-06-04T08:38:20Z
dc.date.issued 2016-08
dc.identifier.citation Arulrasa, A., & Mampearachchi, W.K. (2016). Systematic ratings of accident prone T – intersections on national highways [Abstract]. In H.R. Pasindu (Ed.), Proceedings of the Transportation Research Forum 2016 (pp. 25-26). Department of Civil Engineering, University of Moratuwa. https://uom.lk/sites/default/files/civil/files/TRFAbstract%202016_0.pdf en_US
dc.identifier.uri http://dl.lib.uom.lk/handle/123/18125
dc.description.abstract Road Traffic accidents and the resulting deaths have now emerged as one of the major safety and public problems. In this study, intersection geometry of roads were considered to rate accident prone T – Intersection locations in national highways. The only source of accident data in Srilanka is available with the traffic police. Availability of accident data is vital for identifying accident prone locations in the traditional data analysis process. However, insufficient data for statistical analysis and changes to the geometry of the intersection with improvement is a major drawback of analyzing the available data. In this study, a method is introduced to find and rate the accident prone T – Intersections with respect to road geometry without depending on traffic police accident data. The parameters of road geometry such as road width, vertical profile and type of movement and combination of these: - are considered as main influence elements and identified vulnerable factors of the each element. The lane width was classified as single lane, two lane and multi lane and approach road profile was divided into flat, medium and adverse. The turning movement types were classified into four types: M1, M2.M3 & M4 based on centre median configuration for traffic movement at the junction. Then the relative contribution of the elements to the accident prone T – Intersections was determined by using Analytical Hierarchy Process (AHP) with a rating system. The rating of each element was suggested by experts of Roads and Traffic Engineering. Expert ratings were subjected to consistency testing and AHP determines the weightage of each elements. It was found that road width is the most critical element of the road geometry and followed by vertical profile and turning movement type. The intersections did not comply with the model were further studied and identified the causes for lower or higher number of accidents in those locations. Most vulnerable accident prone T-intersections had the combination of, flat gradient of approach road, single lane width and open centre median in the major road of the intersection. en_US
dc.language.iso en en_US
dc.publisher Department of Civil Engineering, University of Moratuwa. en_US
dc.relation.uri https://uom.lk/sites/default/files/civil/files/TRFAbstract%202016_0.pdf en_US
dc.subject Accident prone location en_US
dc.subject Geometry elements en_US
dc.subject Road safety en_US
dc.title Systematic ratings of accident prone T – intersections on national highways en_US
dc.type Conference-Abstract en_US
dc.identifier.faculty Engineering en_US
dc.identifier.department Department of Civil Engineering en_US
dc.identifier.year 2016 en_US
dc.identifier.conference Transport Research Forum 2016 en_US
dc.identifier.place Katubedda en_US
dc.identifier.pgnos pp. 25-26 en_US
dc.identifier.proceeding Proceedings of the Transport Research Forum 2016 en_US
dc.identifier.email wasanthak@uom.lk en_US
dc.identifier.email arulrasa2000@yahoo.com en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record