Institutional-Repository, University of Moratuwa.  

The Effect of 2 - amino - 2 methyl - 1 - propanol on stabilization and properties of latex and latex mixes used in latex dipping operations

Show simple item record

dc.contributor.advisor Walpolage, S
dc.contributor.advisor Pieris, M
dc.contributor.author Liyanage, WPR
dc.date.accessioned 2011-07-22T10:07:22Z
dc.date.available 2011-07-22T10:07:22Z
dc.identifier.citation Liyanage, W.P.R. (2010). The Effect of 2 - amino - 2 methyl - 1 - propanol on stabilization and properties of latex and latex mixes used in latex dipping operations [Master's theses, University of Moratuwa]. Institutional Repository University of Moratuwa. http://dl.lib.mrt.ac.lk/handle/123/1884
dc.identifier.uri http://dl.lib.mrt.ac.lk/handle/123/1884
dc.description.abstract Ammonia preservation is widely used as the standard method of preservation for Natural Rubber (NR) latex. Because ammonia is volatile its concentration in latex is difficult to control. This study presents an alternative method of preservation of natural rubber latex using a less volatile material. Centrifuged NR latex from Kalutara district was used for this investigation and 2-amino-2- methyl propanol (AMP) was added to centrifuged latex instead of ammonia. Controlled samples were prepared with ammonia as the standard preservative and in addition, ammonia and AMP mixed samples also was prepared for investigating the combined effect. Prepared latex samples were continuously monitored for characterization against the controlled samples using standard test methods like MST, VFA number, pH, Viscosity, Alkalinity, etc. Compounded latex samples were prepared once in a week from these preserved samples and dipped gloves were made to investigate the processability of these latices and determine the physical properties like tensile strength, abrasion resistance, etc. of the glove films to compare the properties with the controlled samples. Results suggest that AMP can be used effectively as a preservative for NR latex. Although 0.2% AMP and AMPINH3 mixes gave satisfactory results 0.7 % AMP preserved sample gave the best results.
dc.language.iso en en_US
dc.subject THESIS-CHEMICAL AND PROCESS ENGINEERING
dc.subject CHEMICAL AND PROCESS ENGINEERING-THESIS
dc.subject POLYMER TECHNOLOGY
dc.subject STABILISATION
dc.subject POLYMERS-STABILISATION
dc.subject LATEXES-Stabilizers ;
dc.title The Effect of 2 - amino - 2 methyl - 1 - propanol on stabilization and properties of latex and latex mixes used in latex dipping operations
dc.type Thesis-Abstract
dc.identifier.faculty Engineering en_US
dc.identifier.degree MSc en_US
dc.identifier.department Department of Chemical Engineering en_US
dc.date.accept 2010
dc.identifier.accno 94506 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record