MESII - 2023: Recent submissions

  • Development of new bio-based adhesive for paper/cardboard 
    Dileepa, KDR; Uresh, KA; Udayakumara, SV [Conference-Abstract]
    Bio-based adhesives are derived from renewable resources such as plant-based materials, animal by-products, and microbial sources. Latex-based bioadhesives, specifically those made from natural latex derived from plant ...
  • Development of tire strain measurement sensor 
    Adhikari, AAMBW; Dissanayake, DMAGI; Weragoda, VSC [Conference-Abstract]
    This research investigates engineering of a tyre strain measurement sensor using elastomer based conductive polymer. This sensor allows monitoring the changes in vehicle tyre strain in real time. This information can be ...
  • Monitoring of fiber reinforced polymer degradation with ultrasound 
    Sinthujan, K; Sivahar, V [Conference-Abstract]
    This research focusses on monitoring the degradation of Fiber Reinforced polymer (FRP) composites using ultrasonic testing. The study aims to assess the impact of ultraviolet (UV) radiation on FRP materials and establish ...
  • Suitability of using al sludge waste to produce paving block 
    Wijethunga, KHDL; Liyanage, DPLNM; Guluwita, SP [Conference-Abstract]
    Aluminum sludge is a by-product of water treatment plants that use aluminum salts as a primary coagulant. Researchers examine the influence of dry aluminum sludge as a partial Portland cement type I replacement on the ...
  • Design and simulation of solid state micropump based on piezoelectric actuator 
    Sivahar, V [Conference-Abstract]
    This research presents the design and simulation of a solid-state insulin micropump based on a piezoelectric actuator for a wearable insulin pump device to be used on the human body. The primary objectives of this design ...
  • Synthesis of cellulose based solution to fabricate nanofibers by electrospinning technique 
    Kantha, WDY; Madusanka, SDC; Samarasekara, AMPB; Amarasinghe, DAS [Conference-Abstract]
    This study reports on the synthesis of cellulose-based solution suitable for electrospinning. Cellulose is a biodegradable and renewable resource with excellent mechanical properties, making it an attractive material for ...
  • Dynamic mechanical analysis of elastomers 
    Bhashana, BTA; Weerasena, KMWK; Weragoda, VSC [Conference-Abstract]
    Dynamic Mechanical Analysis (DMA) indeed plays a significant role in both research and quality control processes, especially in the field of materials science and engineering. DMA allows researchers and manufacturers to ...
  • Estimation of weibul modulus through ultrasonic measurements 
    Rangajeewa, GLJ; Dewaraja, MM; Sivahar, V [Conference-Abstract]
    This research explores non-destructive ultrasonic measurements to estimate the Weibull modulus of glass, a key parameter for assessing its strength and reliability. Glass's unique properties make it widely used in various ...
  • Preparation and characterization of LDPE based wood-plastic composites 
    Samarakkody, GDVM; Udayakumara, SV [Conference-Abstract]
    This research focuses on the preparation and characterization of Low-Density Polyethylene (LDPE) based wood-plastic composites (WPCs). The demand for eco-friendly and sustainable materials has risen due to the global energy ...
  • Preparation and characterization of HDPE–wood composite 
    Piyankara, WKP; Udayakumara, SV [Conference-Abstract]
    The objective of this research is to prepare a wood plastic composite (WPC) material for partition boards using saw dust and high-density polyethylene (HDPE). WPCs have gained popularity as a low cost, ecofriendly material. ...