Institutional-Repository, University of Moratuwa.  

Mechanical behaviour of rice husk ash and cement–stabilized peat under different curing periods

Show simple item record

dc.contributor.author Narasinghe, NMNT
dc.contributor.author Sampath, KHSM
dc.contributor.editor Pasindu, HR
dc.contributor.editor Damruwan, H
dc.contributor.editor Weerasinghe, P
dc.contributor.editor Fernando, L
dc.contributor.editor Rajapakse, C
dc.date.accessioned 2024-10-03T04:36:58Z
dc.date.available 2024-10-03T04:36:58Z
dc.date.issued 2024
dc.identifier.citation Narasinghe, N.M.N.T., & Sampath, K.H.S.M. (2024). Mechanical behaviour of rice husk ash and cement–stabilized peat under different curing periods. In H.R. Pasindu, H. Damruwan , P. Weerasinghe, L. Fernando, & C. Rajapakse (Eds.), Proceedings of Civil Engineering Research Symposium 2024 (pp.5-6). Department of Civil Engineering, University of Moratuwa. https://doi.org/10.31705/CERS.2024.3
dc.identifier.uri http://dl.lib.uom.lk/handle/123/22862
dc.description.abstract The problematic nature of peat due to its high organic content, substantial compressibility, and low shear strength, frequently requires stabilization to make it appropriate for construction. This research focuses on enhancing peat soil properties for construction purposes, particularly focusing on areas in Sri Lanka where peatlands present significant challenges for infrastructure development. With involvement in sustainable and cost-effective solutions, the study investigates the efficacy of using Rice Husk Ash (RHA) and cement as stabilizers for natural peatlands. In fact, this approach offers a solution for traditional stabilizers while harnessing the beneficial properties of RHA – a waste product, to enhance the peat stabilization process. This method aims not only to improve the mechanical properties of peat but also to provide an alternative to traditional stabilizers like lime or cement, which are linked to higher carbon dioxide emissions. The suitable mix proportions of RHA and Portland composite cement (PCC) and their effects on peat's Unconfined Compressive Strength (UCS) were obtained from laboratory experiments, under different curing conditions and curing periods. The prepared samples were subjected to UCS tests to determine the stabilized peat's peak strength and stress-strain behavior. The strength and stiffness of the stabilized peat were calculated using observed test results and analyzed by comparing it with the properties of natural peat. The findings suggest that a specific mix proportion of RHA and PCC, under a defined curing period, significantly enhances the UCS, shear strength, and stiffness of peat. The optimal curing condition was identified as submerging in water with a 1.25 kN/m2 surcharge load and maintaining in-situ conditions, where stabilized samples were cured at low temperatures. It is evident from the study that different mix proportions resulted in varying strength gain variations across different curing periods, including 7 days, 28 days, 45 days, 60 days, and 80 days. In conclusion, mixing peat with 10% PCC + 10% RHA and curing for 60 days under submerged curing with a surcharge would yield optimum strength and stiffness. After evaluating the mechanical properties, Scanning Electron Microscope (SEM) images were taken to identify the behavior of the microstructure. The microstructure reveals a hollow, perforated cellular structure, along with a minor network of fibrous elements. Voids between peat soil particles have filled with C-H-S bonds. This observation suggests that while RHA may offer certain benefits as a secondary stabilizing material, excessive reliance on it may not be conducive to achieving the desired strength properties in stabilized peat soil. However, there is a possibility of partially replacing cement with RHA which would result in the strength and stiffness gain up to anticipated levels. By demonstrating the positive impact of these materials on peat stabilization, the research contributes to the field of geotechnical engineering, offering a viable solution for construction on peatlands. en_US
dc.language.iso en en_US
dc.publisher Department of Civil Engineering, University of Moratuwa en_US
dc.subject Curing period en_US
dc.subject Peat en_US
dc.subject Portland-Composite Cement en_US
dc.subject Rice husk ash en_US
dc.title Mechanical behaviour of rice husk ash and cement–stabilized peat under different curing periods en_US
dc.type Conference-Abstract en_US
dc.identifier.faculty Engineering en_US
dc.identifier.department Department of Civil Engineering en_US
dc.identifier.year 2024 en_US
dc.identifier.conference Civil Engineering Research Symposium 2024 en_US
dc.identifier.place Moratuwa en_US
dc.identifier.pgnos pp.5-6 en_US
dc.identifier.proceeding Proceedings of Civil Engineering Research Symposium 2024 en_US
dc.identifier.email nureshatn@uom.lk en_US
dc.identifier.doi https://doi.org/10.31705/CERS.2024.3 en_US


Files in this item

This item appears in the following Collection(s)

  • CERS - 2024 [47]
    Civil Engineering Research Symposium 2024

Show simple item record