Institutional-Repository, University of Moratuwa.  

Study of the behavior of multi-metallic systems under high-velocity impact loads

Show simple item record

dc.contributor.advisor Fernando L
dc.contributor.author Wijekoon, KMSR
dc.date.accessioned 2024-10-09T07:13:29Z
dc.date.available 2024-10-09T07:13:29Z
dc.date.issued 2023
dc.identifier.citation Wijekoon, K.M.S.R. (2023). Study of the behavior of multi-metallic systems under high-velocity impact loads [Master's theses, University of Moratuwa]. Institutional Repository University of Moratuwa. http://dl.lib.uom.lk/handle/123/22886
dc.identifier.uri http://dl.lib.uom.lk/handle/123/22886
dc.description.abstract The behavior of multi-material layered systems under high-velocity impact loads, such as impact and blast scenarios, has gained significant attention from researchers over the past years due to its extensive applications in the automobile and aerospace industries, and ballistic armor and blast resilient structures. The focus is being shifted to multi-material systems over monolithic systems due to their superior characteristics in stress attenuation and energy absorption, and high preference for lightweight structures. In this research, an attempt has been made to investigate the impact-induced stress wave propagation through a multi-metallic layered system that is subjected to high-velocity impact loads. This study consists of two major components. 1) Elastic wave propagation and 2) Shock wave propagation. For the elastic wave propagation, four different test cases including a steel monolithic target, steel-titanium and steel-aluminium bi-metallic targets, and a steel-titanium-aluminium tri-metallic target, were considered. They were subjected to a low-velocity (180 ms-1) impact where only elastic waves are anticipated to be generated in the target. For shock wave propagation, only a steel monolithic target was considered which was subjected to an impact velocity of 350 ms-1. For both cases, numerical and analytical frameworks were developed to simulate the material response. The LS-DYNA finite element package was used to develop two-dimensional axisymmetric numerical models, and it was validated against the existing experimental results obtained from a single-stage gas gun test which were in good agreement. The analytical models which were the main focus of the present research were implemented in MATLAB which monitors and resolves the interaction of each propagation wave and then provides the overall response of the flyer-target system. The analytical model was validated against the results obtained from the validated numerical models considering stress-time histories. The outputs acquired from the analytical model for elastic wave propagation agree with that of the numerical model with reasonable accuracy. However, the developed analytical model for shock wave propagation gives reasonable results only up to the separation of the flyer and multi-material target where a significant variation can be identified between results after the separation. The developed models can be used to vi find the most optimum configuration in terms of stress attenuation for a given set of metallic materials which reduces the time and cost associated with high-velocity impact tests. Also, they can be used to find the required bonding strength to avoid debonding at material interfaces that cannot be obtained from experiments. Keywords: elastic waves, shock waves, multi-metallic, numerical modeling, wave interaction, analytical modeling en_US
dc.language.iso en en_US
dc.subject CIVIL ENGINEERING – Dissertation
dc.subject WAVE INTERACTION
dc.subject ANALYTICAL MODELING
dc.subject SHOCK WAVES
dc.subject ELASTIC WAVES
dc.subject MULTI-METALLIC
dc.subject NUMERICAL MODELING
dc.subject MSc (Major Component Research)
dc.title Study of the behavior of multi-metallic systems under high-velocity impact loads en_US
dc.type Thesis-Full-text en_US
dc.identifier.faculty Engineering en_US
dc.identifier.degree Master of Science (Major Component of Research) en_US
dc.identifier.department Department of Civil Engineering en_US
dc.date.accept 2023
dc.identifier.accno TH5535 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record