Abstract:
Natural rubber latex is a colloidal dispersion of cis 1 ,4-polyisoprene in an aqueous medium.
Chemicals are added to NR latex mainly as dispersions, emulsions and solutions at the
compounding stage of latex to enhance the processing characteristics and to achieve the
desired properties of the final product. The addition of various chemicals into latex as one
of the above method should be able to maintain the colloidal stability of the latex. The
colloidal stability of the latex compound is governed by the particle size, physical nature,
viscosity, pH and the stability of the dispersions//In this study an attempt was made to enhance the sorption properties of NR latex
foam by introducing a suitable adsorbent into the latex compound. There was an early
attempt on incorporation of activated carbon into the natural rubber latex foam .From this
investigation it was found instead of activated carbon zeolite mineral can be used as an
adsorbent with minimizing the problems compared to activated carbon incorporation.
Stable dispersion of 36 % zeolite can be prepared by mixing the zeolite with dispersing
agent and water .The mechanical agitation in ten minutes is sufficient to prepare the zeolite
dispersion with satisfying the basic requirements of a stable dispersion. According to the
chemical and mechanical stability studies on the latex compound ,it has revealed up to 8%
(on dry weight ) dosage of zeolite dispersion can be incorporated into latex compound
without disturbing the fine, continuous cell structure of NR foam .The similar investigation
was carried out with the activated carbon and compared with zeolite foam samples.
Activated carbon dispersion prepared as 25 % stable dispersion and incorporated into NR
foam up to 5% (on dry weight) dosage.//The results of the experiment reveals that NR latex foam with Zeolite has a
significant sorption properties for .ammonia and carbon dioxide gases compared to foam
with activated carbon whereas organic matter sorption is higher in foams with Activated
carbon adsorbent. This sorption property of foams with zeolite can be used to generate a
pleasant indoor environment by reducing odour and pollutant gases.
