Abstract:
The EN and SLS specifications for Portland cement have largely similar provisions on physical and chemical parameters of cement. However, consistency of cement within standards specifications is significantly high and it affect to standard deviation of concrete. In order to obtain good concrete quality, concrete users need to target a low standard deviation of concrete strength. In order to reduce the strength standard deviation of concrete strength, the material properties variations need to be lowered. This paper discusses variation in cement properties from 5 different cement suppliers. Cement from given suppliers varies between batches/ shipments. It is well understood that there are significant differences in mortar strength, chemical composition, fineness, setting times of same cement type (Type 1) from different suppliers. Experiments were conducted with 48 cement samples of 5 different cement suppliers collected over 10 months time from January 2011 to October 2011. It was found that as all cement brands comply with EN and SLS standards. However, coefficients of variation (COVs) of most parameters, especially strength, are significantly high. This paper answers two key questions; are all nominally similar cements the same? Does cement from same supplier always behave consistently? Finally it recommends cement users and specifies a systematic way to select a consistent cement supplier for an economical and sustainable construction.
