91 
 
REFERENCES 
 
[1]  Deutz TBD 620V16 Main Engine Operation Manual, Motoren Werke Mannheim AG.  
[2]  "www.marindiesels.info," [Online]. Available: 
http://www.marinediesels.info/2_stroke_engine_parts/liner.htm. [Accessed 15 
november 2017]. 
[3]  J. a. G. H. L. Affenzeller, Bearings and lubrication of internal combustion 
engines,storage and lubrication of internal combustion engines, . Vienna, Austria: 
Springer-Verlag, 1996.  
[4]  J. S. Lenthall, Cylinder bore surface finish – its evolution and specification. In: Lenthall 
J.S. (ed.). Collected papers from the one-day seminar The Tribology of Internal 
Combustion Engines, ,, London, UK,: University of Birmingham, UK, 7 november 1996..  
[5]  J. T. A. A. a. L. G. Galligan, A scuffing test for piston ring/bore combinations: Part. II. 
Formulated motor lubrication. Wear, 1999.  
[6]  R. Ohlsson, A topographic study of functional surfaces., Göteborg, Sweden: Chalmers 
University of Technology, Department of Production Engineering, 1996.  
[7]  K. D. L. &. B.Ramamoorthi, "Applied Surface Science," Applied Surface Science, vol. 365, 
pp. 19-30, 01 March 2015.  
[8]  f. mogul, "federalmogul," [Online]. Available: 
http://korihandbook.federalmogul.com/en/section_6.htm. [Accessed 18 november 
2017]. 
[9]  "Piston Ring Museum," Riken, [Online]. Available: 
www.riken.co.jp/english/pistonring/technology/application.html. 
[10]  K. (. mollenhauer, diesel engines Manual, Berlin,Germany, 1997.  
[11]  K. F. Dufrane, "Wear performance of ceramics in ring/cylinder applications," Journal of 
the American ceramic Society, vol. 72, no. 4, p. pp. 691–695, 1989.  
92 
 
[12]  K. Radil, The influence of honing on the wear of ceramic coated piston rings and 
cylinder liners. Lubrication Engineering, 2001.  
[13]  F. a. R. D. E. Rastegar, "Alternative to chrome: HVOF cermet coatings forhigh horse 
power diesel engines," in Surface and Coatings Technology,, 1997, p. pp.156–163. 
[14]  Federal-Mogul., "(piston rings / crankcases).reprinted from ATZ/MTZ - Supplement 
Shell Lexicon combustion motor," in Federal-Mogul Powertrain System, Burcheid, 
Germany, 1998.  
[15]  E. F. C. a. B. G. Broszeit, "Deposition, properties and applications of PVD CrxN 
coatings," in Surface and Coatings Technology, 1999, p. pp. 9–16. 
[16]  S. P. Z. L. Z. X. X. A. H. a. W. Z. Zhuo, "Multi-layercompound coating cast iron piston ring 
by multi-arc and magnetron sputtering ioncompound plating technique," in Surface 
and Coatings Technology, 2000, p. pp.422–427. 
[17]  M. H. a. K. F. A. Haselkorn, "Development of wear resistant ceramic coatings for diesel 
engines,," in SAE Proceedings of the Annual Automotive Technology Development 
Contractors Co-ordination Meeting, 1992.  
[18]  D. E. Richardson, "Comparison of measured and theoretical inter-ring gas pressure on a 
diesel engine.," in SAE Technical Papers, Society of Automotive Engineers, 1996.  
[19]  M. D. Röhrle, " Pistons for internal combustion engines," in fundamentals of piston 
technology, Germany, 1995, p. 70. 
[20]  M. A. H. T. T. a. U. A. .. Takiguchi, "Characteristics of friction and lubrication of two-ring 
piston," in JSAE Review, 1996, p. pp. 11–16. 
[21]  N. P. J. Bedajangam S. K.a, "Friction losses between piston ring - liner assembly of 
internal combustion engine : A review," vol. 3, no. 6, June 2013 1.  
[22]  Y. S. M. E. Y. H. T. a. K. T. Wakuri, "Studies on frictioncharacteristics of reciprocating 
engines," in SAE Technical Paper Series, Society of Automotive Engineers, Inc, 1995, p. 
15. 
93 
 
[23]  P. a. V. M. Reipert, "Simulation of the Piston/Cylinder Behavior for Diesel Engines," in 
SAE Technical Paper Series , Society of Automotive Engineers, Inc, 2001, p. 18. 
[24]  P. C. a. A. S. Sui, "Piston ring pack friction and lubrication analysis of an automobile 
engine using a mixed lubrication model. .," in SAE Paper 931937,, Society of 
Automotive Engineers,Inc, 1993, p. 15. 
[25]  A. K. Y. a. E. I. s. :. F. F. B. W. a. P. A. (. Ronen, "Different approaches for analysis of 
friction in surface textured reciprocating component," in 2nd World Tribology 
Congress, Vienna, Austria,.  
[26]  R. I. Taylor, "Engine friction: the influence of lubricant rheology," Journal of 
Engineering Tribology, p. pp. 235–246, 1997.  
[27]  V. R. N. B. B. A. C. H. A. a. K. D. M. Durga, "influence of surface characteristics and oil 
viscosity on friction behaviour of rubbing surfaces in reciprocating engine," in Fall 
Technical Conference ASME-ICE, 1998.  
[28]  R. Munro, "Diesel engine ring scuff - is there a major problem?," in Piston ring scuffing, 
London, UK, Mechanical Engineering Publications Limited, 1976, p. pp. 9–14.. 
[29]  D. G. S. I. a. S. E. H. Clarke, "Design considerations for a "floating liner" method of 
measuring piston/piston ring friction in internal combustion engine," in . NORDTRIB '90 
Proceedings of the 4th Nordic symposium.  
[30]  T. W. Y. S. M. a. K. T. Hamatake, "Some studies on the tribology of diesel engines.," in 
23rd CIMAC world congress on combustion engine technology for ship propulsion, 
power generation, rail traction,, Hamburg, germany, 2001.  
[31]  Golloch, R., Kessen, U. and Merker, G. P. . e, , "Tribological investigations on the piston 
assembly group of a diesel engine," MTZ Worldwid, 2002. 
[32]  Urabe, M., Tomomatsu, T., Ishiki, K., Takiguchi, M. and Someya, T. , "Variation of Piston 
Friction Force and Ring Lubricating Condition in a Diesel Engine with EGR," in SAE 
Technical Paper Series , Society of Automotive Engineers, Inc, 1998.  
[33]  R. C. Coy, " Practical applications of lubrication models in engines," Tribology 
94 
 
International, vol. 31, no. 10, p. pp. 563–571 , 1998.  
[34]  E. I. K. Y. Ronen A, "Friction-reducing surface-texturing in reciprocating automotive 
components," in Tribology Transaction, 2001, pp. 359-366. 
[35]  Kligerman Y, Etsion I, Shinkarenko A., " Improving tribological performance of piston 
rings by partial surface texturing.," ASME Journal of Tribology, vol. 127, no. 3, p. 632–
638, 2005.  
[36]  Etsion I, Sher E., " Improving fuel efficiency with laser surface textured piston rings," 
Tribology International, vol. 42, no. 4, pp. 542-547, 2009.  
[37]  Gadeschi GB, Backhaus K, Knoll G., " Numerical analysis of laser-textured piston-rings 
in the hydrodynamic lubrication regime," ASME Journal of Tribology, vol. 134, no. 4, 
pp. 1-8, 2012.  
[38]  Zavos AB, Nikolakopoulos PG., " Simulation of piston ring tribology with surface 
texturing for internal combustion engines," Lubrication Science, vol. 27, no. 3, pp. 151-
176, 2015.  
[39]  Shen C, Khonsari MM., " The effect of laser machined pockets on the lubrication of 
piston ring prototypes," Tribology International, vol. 101, pp. 273-283, 2016.  
[40]  Usman A, Park CW, ". Optimization the tribological performance of textured piston 
ring-liner contact for reduced friction losses in SI engine: warm operating conditions," 
Tribology International., vol. 99, p. 224–236., 2016.  
[41]  T. E., " Modelling the hydrodynamic support of cylinder bore and piston rings with 
laser textured surfaces," Tribology International., vol. 59, pp. 90-96, 2013.  
[42]  Yin BF, Li XD, Fu YH, Yun W., " Effect of laser textured dimples on the lubrication 
performance of cylinder liner in diesel engine," Lubrication Science, vol. 24, no. 7, p. 
293–312, 2012.  
[43]  Zhou YK, Zhu H, Tang W, Ma CB, Zhang WQ, " Development of the theoretical model 
for the optimal design of surface texturing on cylinder liner," Tribology International, 
vol. 52, no. 1, pp. 1-6, 2012.  
95 
 
[44]  Mohamad SA, Lu XQ, Zheng Q., "Numerical modeling of lubrication of piston ring of 
two-stroke marine diesel engine considering the effect of multi-scale grooves on the 
cylinder liner," journal of engineering tribology, vol. 229, no. 989-1002, 2015.  
[45]  Mohamad SA, Lu XQ, Zheng Q. , "Effect of cylinder liner oil grooves shape on two-
stroke marine diesel engine’s piston ring friction force," in Advances in Mechanical 
Engineering, 2015.  
[46]  S. EH., " Optimising the design of a piston-ring pack using DoE methods," Tribology 
International, vol. 44, no. 1, pp. 29-41, 2011.  
[47]  Zhan J, Yang MJ., " The effects of dimple distribution angle on the tribology 
performance of a laser surface textured cylinder piston ring system," Lasers in 
Engineering, vol. 29, no. 1, pp. 123-131, 2014.  
[48]  Gu CX, Meng XH, Xie YB, Yang YM. , "Effects of surface texturing on ring/liner friction 
under starved lubrication," Tribology International, vol. 94, p. 591–605, 2016.  
[49]  Morris N, Rahmani R, Rahnejat H, King PD, Howell-Smith S. A , "numerical model to 
study the role of surface textures at top dead center reversal in the piston ring to 
cylinder liner contact," ASME Journal of Tribology, vol. 138, no. 2, 2016.  
[50]  Shahmohamadi H, Mohammadpour M, Rahmani R, Rahnejat H, Garner CP, Howell-
Smith S., " On the boundary conditions in Multi-phase flow through the piston ring-
cylinder liner conjunction," Tribology International, vol. 90, pp. 164-174, 2015.  
[51]  Ausas RF, Jai M, Ciuperca IS, Buscaglia GC., " Conservative one-dimensional finite 
volume discretization of a new cavitation model for piston-ring lubrication," Tribology 
International, vol. 57, pp. 54-56, 2013.  
[52]  Gu CX, Meng XH, Xie YB, Zhang D, " Mixed lubrication problems in the presence of 
textures: An efficient solution to the cavitation problem with consideration of 
roughness effects," Tribology International, vol. 103, pp. 506-528, 2016.  
[53]  Zhang JY, Meng YG., " Direct observation of cavitation phenomenon and hydrodynamic 
lubrication analysis of textured surfaces," in Tribology Letters, 2012, p. 147–158.. 
96 
 
[54]  Checo HM, Ausas RF, Jai M, Cadalen JP, Choukroun F, Buscaglia GC. , "Moving textures: 
simulation of a ring sliding on a textured liner," Tribology International., vol. 72, p. 
131–142, 2014.  
[55]  Morris N, Rahmani R, Rahnejat H, King PD, Howell-Smith S. A, " numerical model to 
study the role of surface textures at top dead center reversal in the piston ring to 
cylinder liner contact," ASME Journal of Tribology, vol. 138, no. 2, 2016.  
[56]  N. Kondratiev, Failures and defects of marine diesels, moscow, 1985.  
[57]  Kodali P, How P, McNulty WD, "Methods of improving cylinder liner wear," in 
Proceedings of the SAE 2000 world congress, Detroit, 2000.  
[58]  Gadow R, Lopez D, Perez J. , "Carbon deposition reducing coatings for highly loaded 
large diesel engines," in Proceedings of the 2003 SAE world congress, Detroit, 2003.  
[59]  k. FURSUND, WEAR IN CYLINDER LINER,, Copenhagm (Denmnrk): A/S Burmeister & 
Wain,, 1957.  
[60]  Dong, W. P., Davis, E. J., Butler, D. L. and Stout, K. J., " Topographic features of cylinder 
liners - an application of three-dimensional characterization techniques," Tribology 
International, vol. 28, p. 453–463, 1995.  
[61]  L. Piaseczny, ., Marine engine repair technology, Gdańsk : marine publishing house, 
1992.  
[62]  Wajand, J.A., Wajand, J.T, medium and high speed piston engines, ,, Warsaw: WNT, 
2005..  
[63]  P. K. S. a. N. K. S. Subodh Kumar Sharma, "Experimental Thermal Analysis of Diesel 
Engine Piston and Cylinder Wall," vol. 2015, no. Article ID 178652, 2015.  
[64]  A. S. &. G. Bitelli, "Abbott curve & Volumetric parameters," Laser Scanning on Road 
Pavements :A New Approach for characterizing Surface Texture , no. December, 2012.  
[65]  W. A. a. G. P. A. Glaeser, Development of a wear test for adiabatic diesel ring and liner 
materials. ASTM 1993, Proc Symp wear test selection for design and application, 
97 
 
Miami, FL, USA: ASTM Philadelphia, 1992.  
[66]  Haller, C., Coward, R., and LaMastra, D, "Root Cause Investigation of Cracked Cylinder 
Liners in ALCO 251 Diesel Engines in Nuclear Standby Service," SAE Technical Paper, 
1994. 
[67]  Suzuki, Y. J. Mater., 1988.  
[68]  M. a. T. C. M. Priest, Automobile engine tribology - approaching the surface. Wear, 
2000.  
[69]  P. K. S. a. N. K. S. Subodh Kumar Sharma, "Experimental Thermal Analysis of Diesel 
Engine Piston and Cylinder Wall," vol. Volume 2015 , no. Article ID 178652, 2015.