References [1] “Climate change 2007:synthesis report,” IPCC, IPCC, Geneva, Switzerland, Tech. Rep., 2007. [2] (2010) Sustainable Energy Authority. [Online]. Available: http://www.energy. gov.lk/sub pgs/energy managment.html [3] (2008, June) National energy policy & strategies of sri lanka. Ministry of Power and Energy. [Online]. Available: http://www.ceb.lk/download/db/ national energy policy.pdf [4] W. E. Council. World energy resources -2013 survey. World Energy Council. [Online]. Available: http://www.worldenergy.org/wp-content/uploads/2013/09/ Complete WER 2013 Survey.pdf [5] (2012) Sri lanka energy balance. Sustainable Energy Authority,Sri Lanka. [Online]. Available: http://www.info.energy.gov.lk/ [6] T. Jurena and J. Hajek, “Mathematical modelling of grate combustion: Bed and freeboard coupling issues,” in Chemical engineering transactions, P. Varbanov, J. Klemes, P. Seferlis, A. I. Papadopoulos, and S. Voutetakis, Eds., vol. 35, no. DOI:10.3303/CET1335164. The Italian Association of Chemical Engineering, 2013, pp. 985–990. [7] H. Thunman and B. Leckner, “Thermo chemical conversion of biomass and wastes,” Nordic graduate school BiofuelGS-2,Chalmers, Goteborg, November 2007. [8] C. D. Blasi, “Multi-phase moisture transfer in the high-temperature drying of wood particles,” ChemicalChemical Engineering Science, vol. 53, no. 2, pp. 353– 366, 1998. 100 http://www.energy.gov.lk/sub_pgs/energy_managment.html http://www.energy.gov.lk/sub_pgs/energy_managment.html http://www.ceb.lk/download/db/national_energy_policy.pdf http://www.ceb.lk/download/db/national_energy_policy.pdf http://www.worldenergy.org/wp-content/uploads/2013/09/Complete_WER_2013_Survey.pdf http://www.worldenergy.org/wp-content/uploads/2013/09/Complete_WER_2013_Survey.pdf http://www.info.energy.gov.lk/ [9] T. Jurena, “Numerical modelling of grate combustion.” Ph.D. dissertation, Brno University of Technology,Faculty of Mechanical Engineering,Institute of Process and ENvironmental Engineering, 2012. [10] Y.B.Yang, Y.R.Goh, R.Zakaria, R.Nasserzadeh, and J.Swithenbank, “Mathemat- ical modelling of msw incineration on a travelling bed,” in Waste Management. Elsevier Science Limited, 2002, vol. 22, pp. 369–380. [11] Y. B.Yang, C.Ryu, J.Goodfellow, V.N.Sharifi, and J.Swithenbank, “Modelling waste combustion in grate furnaces,” in Trans IChemE, Part B, Process Safety and Environmental Protection, vol. 82, 2004, pp. 208–222. [12] Y.B.Yang, H.Yamauchi, V.Nasserzadeh, and J.Swithenbank, “Effects of fuel de- volatilisation on the combustion of wood chips and incineration of simulated mu- nicipal solid wastes in a packed bed,” Fuel, vol. 82, no. 18, Dec 2003. [13] K.W.Ragland, D.J.Aerts, and A.J.Baker, “Properties of wood combustion for analysis,” in Bioresource Technology, vol. 37. Elsevier Science Ltd, 1991, pp. 161–168. [14] Y.B.Yang, V. Sharifi, and J.Swithenbank, “Numerical simulation of the burn- ing characteristics of thermally-thick biomass fuels in packed-beds,” in Trans IChemE, Part B,Process Safety and Environmental Protection, vol. 83, 2005, pp. 549–558. [15] R. Mehrabian, R. Scharler, A. Weissinger, I. Obernberger, and S.Stangl, “Cfd simulation of biomass grate furnaces with a comprehensive 3d packed bed model,” in Proceedings of the 25th German Flame Day, September 2011. [16] C. Ryu, Y. B. Yang, A. Khor, N. E. Yates, V. N. Sharifi, and J. Swithenbank, “Ef- fect of fuel properties on biomass combustion - identification of the controlling factors(part two- modelling approach),” in Fuel, vol. 84. Elsevier Ltd., 2005, pp. 2116–2130. 101 [17] D.Shin and S.Choi, “The combustion of simulated waste particles in a fixed bed,” in Combustion and flame, vol. 121, The Combustion Institute. Elsevier Science Inc., 2000, pp. 167–180. [18] Y. B. Yang, V. N. Sharifi, and J. Swithenbank, “Converting moving-grate in- cineration from combustion to gasification (numerical simulation of the burning characteristics),” 2006. [19] J.C.Wurzenberger, S.Wallner, H.Raupenstrauch, and J.G.Khinast, “Thermal con- version of biomass: Comprehensive reactor and particle modeling,” in AIChE Journal, vol. 48, no. 10, October 2002, pp. 2398–2411. [20] H.Sabelstrom, Tech. Rep. [21] M. van Blijderveen, “Ignition and combustion phenomena on a moving grate: with application to the thermal conversion of biomass and municipal solid waste,” Ph.D. dissertation, University of Twente, December 2011. [22] R. Mehrabian, R. Scharler, A. Weissinger, and I. Obernberger, “Optimisation of biomass grate furnaces with a new 3d packed bed combustion model -on example of a small-scale underfeed stoker furnace,” in 18th European Biomass Conference & Exhibition. ETA-Renewable Energies (Ed.), Italy, May 2010. [23] W. Yang, C. Ryu, and S. Choi, “Unsteady one-dimensional model for a bed com- bustion of solid fuels,” Proceedings of Institution of Mechanical Engineers, vol. 218, 2004. [24] Y. B. Yang, V. N. Sharifi, J. Swithenbank, L. Lin Ma, I. Darvell, J. M. Jones, M. Pourkashanian, and A. Williams, “Combustion of a single particle of biomass,” in Energy & Fuels, vol. 22, no. 1. American Chemical Society, 2008, pp. 306–316. [25] C. Brucha, B. Petersb, and T. Nussbaumerc, “Modelling wood combustion under fixed bed conditions,” in Fuel, vol. 82. El, 2003, pp. 729–738. 102 [26] S. R. Turns, An introduction to combustion-Concepts and Applications, 2nd ed. Mcgraw Hill, 2000. [27] A. Frassoldati, A. Cuoci, T. Faravelli, E. Ranzi, C. Candusso, and D. Tolazzi, “Simplified kinetic schemes for oxy fuel combustion,” in 1st International Con- ference on Sustainable Fossil Fuels for Future Energy, 2009, pp. 4–5. [28] H.K.Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dy- namics. Pearson Education Limited, 2007, no. 978-0-13-127498-3. [29] R. Bord, W. E.Stewart, and E. N.Lightfoot, Transport Phenomena, 2nd ed. Chemical Engineering Department,University of Wisconsin: John Wiley & Sons,Inc, 2002. [30] L. Davidson. (2011, February) An introduction to turbulence models. Department of Thermo and fluid dynamics. Chalmers University of Technol- ogy,Goteborg,Sweden. [Online]. Available: http://www.tfd.chalmers.se/∼lada [31] J. Karlsson, “Modeling auto-ignition,flame propagation and combustion in non- stationary turbulent sprays,” Ph.D. dissertation, Chalmers university of technol- ogy, 1995. [32] F. P. Karrholm, Numerical Modelling of Diesel Spray Injection and Turbulence Interaction. Department of Applied Mechanics, Chalmers Univesity of Tech- nology, 2006, ch. Appendix-Rhie-Chow interpolation in OpenFOAM. [33] P. Nordin, “Complex chemistry modeling of diesel spray combustion,” Ph.D. dis- sertation, Chalmers University of Technology,Dept. of Thermo and Fluid Dy- namics,Goteborg, 2001. [34] D. Joseph, P. Perez, M. E. Hafi, and B. Cuenot, “Discrete ordinates and monte carlo methods for radiative transfer simulation applied to cfd combustion modelling,” Tech. Rep., February 2008. [Online]. Available: http://www.cerfacs.fr/∼cfdbib/repository/TR CFD 08 21.pdf 103 http://www.tfd.chalmers.se/~lada http://www.cerfacs.fr/~cfdbib/repository/TR_CFD_08_21.pdf [35] Y. B.Yang, C. N.Lim, J.Goodfellow, V.N.Sharifi, and J.Swithenbank, “A diffusion model for particle mixing in a packed bed of burning solids,” in Fuel, vol. 84, 2005, pp. 213–225. [36] G.IBorman and K.W.Ragland, Combustion Engineering, 1st ed. McGraw-Hill, 1998, no. 0-07-006567-5. [37] V. Francescato, E. Antonini, L. Z. Bergomi, C. Metschina, C. Schnedl, N. Krajnc, K. Koscik, P. Gradziuk, G. Nocentini, and S. Stranieri. (2009, April) Wood fuels handbook. AIEL - Italian Agriforestry Energy Association. [Online]. Available: WWW.BIOMASSTRADECENTRES.EU [38] B. M. Jenkins, L. L. Baxter, and J. Koppejan, Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, R. C.Brown, Ed. John Wiley & Sons, Ltd., 2011. [39] B. Jenkins, L. Baxter, T. M. Jr., and T. Miles, “Combustion properties of biomass,” Fuel processing technology, vol. 54, pp. 17–46, 1998. [40] (2012, January) Lower and higher heating values of fuels. U.S. Department of Energy. Hydrogen analysis resource center. [Online]. Available: http: //hydrogen.pnl.gov/cocoon/morf/hydrogen/site specific/fuel heating calculator [41] R. H. Perry and D. W.Green, Perry’s Chemical Engineering Hand Book, R. H. Perry, Ed. McGraw-Hill, 1999. [42] L. R. l., H. Sabelstrom, S. K. Kaer, H. Sorensen, M. Berry, R. Jensen, S. Heine- sen, and K. B. Andersen, “Ps02002-4730 development of generalised model for grate combustion of biomass-final report,” Aalborg University, Tech. Rep., Febru- ary 2007. [43] Y.R.Goh, R.G.Siddall, V. Nasserzadeh, R.Zakaria, J.Swithenbank, D.Lawrence, N.Garrod, and B.Jones, “Mathematical modelling of the waste incinerator burn- ing bed,” Journal of the Inst. Of Energy, 1998. 104 WWW.BIOMASSTRADECENTRES.EU http://hydrogen.pnl.gov/cocoon/morf/hydrogen/site_specific/fuel_heating_calculator http://hydrogen.pnl.gov/cocoon/morf/hydrogen/site_specific/fuel_heating_calculator [44] Y.R.Goh, C.N.Lim, K.H.Chan, R.Zakaria, G.Reynolds, Y.B.Yang, R.G.Siddall, V.Nasserzadeh, and J.Swithenbank, “Mixing, modelling and measurements of incinerator bed combustion,” in 2nd International Symposium on Incineration and Flue Gas Treatment Technology, 1999. [45] A. Kimbrell, “Development and verification of a navier-stokes solver with vor- ticity confinement using openfoam,” Master’s thesis, University of Tennessee, 2012. [46] E.Kindler and I.Krivy, “Object-oriented simulation of systems with sophisticated control,” in International Journal of General Systems, 2011, pp. 313–343. [47] L. John and L. William, section 1.6”Object-Oriented Programming”, 2008, no. ISBN 0-321-53205-8. [48] B. Wuthrich, “Simulation and validation of compressible flow in nozzle geome- tries and validation of openfoam for this application,” Master’s thesis, Institute of Fluid Dynamics,ETH Zurich, 2007. [49] OpenFOAM Programmer’s Guide v2.2.1. OpenFOAM Foundation, 2013, June. [50] OpenFOAM User Guide v2.1.0. OpenFOAM Foundation, 2011, December. [51] http://openfoamwiki.net/index.php/Contrib/swak4Foam. (2014, April) [52] B. F. Gschaider, README for swak4Foam, 2012. [53] http://openfoamwiki.net/index.php/Contrib/groovyBC. (2014, April) [54] http://openfoamwiki.net/index.php/Contrib/PyFoam. [55] N.Wakao and S.Kaguei, Heat and Mass Transfer in Packed Beds. Gorden & Breach Science Publishers& Breach Science Publishers, 1982. [56] T. Lang, K. D. Johansen, E. Garrijo, P. Glarborg, T. Grotkjaer, A. D. Jensen, P. A. Jensen, J. E. Johnsson, A. Kavalauskas, J. N. Knudsen, K. B. Pedersen, and H. Zhou, “Straw combustion on a grate physical, chemical and reaction kinetic 105 data for grate modeling(the joint project ),” Department of Chemical Engineering, Technical University of Denmark and Department of Mechanical Engineering, Technical University of Denmark, Tech. Rep., May 2005. [57] F. P. Karrholm, “Numerical modelling of diesel spray injection, turbulence inter- action and combustion,” Ph.D. dissertation, Chalmers University of Technology, Department of Applied Mechanics, Chalmers University of Technology, Gote- borg, Sweden, 2008. 106