References
Abeysekara, J.D.A. (1985) Design requirements and dimensions for 
Sri Lankans. Journal of national sci
a comfortable work seat for
ence council of Sri Lanka 13(1) 77-88.
Adams, M.A., and Hutton, W.C. (1983). The effect of posture 
lumber intervertebral discs. Spine, 8(6), 665 - 671.
Akerblom, B. (1954). Chairs and sitting. In W.F.Floyd 
symposium on Human Factors in Equipment Design, London: H.K. Lewis, pp. 29- 35.
on the fluid content of
and A.T.Weford, (eds.)
Andersson, G.B.J. (1985). Experimental and Biomechanical Analysis of Seating. In 
E.N.Corlett, J.Wilson and I.Manenica (eds.), The ergonomics of working postures: 
models, methods and cases. London: Taylor and Francis, pp. 309-318.
Anderson, G.B.J. (1980). The load on the lumbar spine in sitting postures. In D.J.Obome 
and J.A.Levis (Eds.) Human Factors in Transport research. New York: Academic Press, 
pp. 231-239.
Murphy, R.W., Ortengren, R., and Nachemson, A.L. (1979). TheAnderson, G.B.J.,
influence of Backrest inclination and lumber support on the lumber lordosis m sitting.
Spine, 4, 52-58.
art? Ergonomics, 45(14), 966 -Annett, J. (2002a). Subjective rating scales: science or 
987.
ply. Ergonomics, 45(14),
Annett, J. (2002b). Subjective rating scales in ergonomics, a re 
1042-1046.
., Kilbom, A., Kuorinka,Fine, L.J., Hagberg, M, Jonsson, B
m(i vbkari-juntira, B.R.A. (1993). A conceptualArmstrong, T.J., Buckle, P 
I.A.A., Silverstein, B.A., Sjogaard, G
169
model for work-related neck and 
Enviorment and Health, 19, 73 - 84.
uPPer limb disorders. Scandinavian Journal of Work,
Bendix, T., lessen, F.B., and Winkel,
with respect to seat height, back position and task. Applied Ergonomics
Bendix, T„ Winkel, J. and Jensen, F. (1985). Comparison of office chairs with fixed 
forwards or backwards inclining or tillable seats, European Journal of Applied 
Physiology, 54, 378 - 385.
J. (1986). An evaluation of a tiltable office chair
,55,30-36.
Bhatnager, V., Drury, C.G., and Schiro, S.G. (1985). Posture, Postural Discomfort and 
Performance. Human Factors, 27(2), 189 - 199.
Bishu, R.R., Susan Hallbeck, M., Riley, M.W., and Stentz, T.L. (1991). Seating comfort 
and its relationship to spinal profile: A pilot study. International Journal of Industrial 
Ergonomics, 8, 89- 101.
Branton, P. (1969). Behaviour, body mechanics, and discomfort. Ergonomics, 12, 316 -
327.
. In N.J.Delleman, 
: Tools for
Bridger, R.S., and Bendix, T. (2004). Pelvis and neighboring segment 
C.M.Haslegrave and D.B.Chaffin (eds.). Working postures and movements 
evaluation and engineering, Boca Raton. Fla. CRC Press, pp. 168 179.
Bridger, R.S, Oridn. D, and Heiberg, M. (1992). A q.^ve „v«stg.«on of 
lumber and pelvie posmres in standing and aiding: inmnelationships wtth body posmon 
and hip muscle length. MamaUcnal Journal oflndusM Economic, 9,235 - .
on biomechanics and comfort
(2007). Effects of backrest 
,38, 755-764.
Carcone, S., and Keir, P.J- 
during seated work. Applied Ergonomics
170
Chaffin, D.B., Andersson, and Martin, B.J. 
3rd edition, New York: A Wiley-Interscienc (1999). Occupational Biomechanics. 
e Publication, pp.349 - 387.
Chester, M.R., Rys, M.J., and Konz, S.A. (2002). Leg swelling, comfort and fatigue when 
sitting, standing, sit/standing. Morootioml Journal of Industrial Ergo
nomics, 29, 289 -
296.
Christiansen, K. (1997). Subjective assessment of sitting comfort. Coll. Antropol, 21(2), 
387-395.
Coleman, N., Hull, B.P., and Ellitt, G. (1998). An empirical study of preferred settings for 
lumber support on adjustable office chairs. Ergonomics, 41(4), 401 - 419.
Congleton, J., Ayoub, M.M., and Smith, J. L. (1985). The design and evaluation of the 
neutral posture chair for surgeons, Human Factors, 27(5), 589 - 600.
Corlett, E.N. (2008). Sitting as Hazard. Safety Science, 46, 815 - 821.
Corlett, E.N. (2005). The evaluation of industrial seating. In J.R.Wilson and N.Corlett 
(eds). Evaluation of human work, NY: Taylor & Francis, pp.729-742.
(1976). A technique for assessing postural discomfort.Corlett, E. N., and Bishop, R. P.
Ergonomics, 19, pp. 175-182.
Corlett, E.N,. and Eklund, J.A.E. (1984). How 
15(2), pp. 111-114.
Dainoff, M.J. (2006). Chairs and furniture 
occupational ergonomics 
occupational ergonomics, NY: Taylor & Francis, pp
does a backrest work? Applied Ergonomics.
d W.Karwowski (eds). The 
controls, and applications in 
.38-1 -38-21.
. in W.S.Marras an
handbook interventions,
171
Dainoff, M., Mark, L., Lin, Y., . Vrmi . ^ Pelxovic, M. (2007). Forget about aesthetics in chair
bMiS f0' C'"nf“ "" W- Ergonomics
“* “ a8P“,S' HCU 2°°7' ““ ^er-Verlag Be* Heidelberg, pp
25.
Dainoff, MJ. (1994). Three myths of ergonomic seating. In R. Lueder and K. No 
Hard facts about soft machine: The ergonomics of seating, USA: Taylor & Francis 
Frost Road, Suite 101, Bristol PA 19007, pp. 37- 46.
ro (eds.). 
, 1900
Dainoff, M.J., and Leonard, L.S (1987). Task and the adjustment of ergonomic chairs. In 
B.Knave and P.G.Wideback (eds.), work with display units, North-Holland: Elsevier 
Science Publishers B.V., pp.294 - 302.
De Looze. M. P., Kuijt-Evers, L. T. F., and Van Dieen, J. (2003). Sitting comfort and 
discomfort and the relationships with objective measures, Ergonomics, 46(10), 985-997.
De Looze. M. P„ Vink, P., and van Dieen, J.H. (2005). Discomfort and dynamics in
Vink (eds.). Comfort and design Principles and good practice:office chairs. In: P.
London: CRC Press, pp. 147 - 154.
: a measurementDesmct, P.M.A., and Hekker, P. (1998). Emotions elicited by car design 
tool for designers. Antomotive Mechatronics design and engineering, 3P ISATA
Conference Proceedings, 237 - 244.
_ _ j Tpy SJET (2001). Designing products with Desmet, P.M.A., Overbeefc C.J., and jpmaehibrreseambdno.gh
added emotional value: development an pp
design. The design Journal, 4(1); 32-47.
thodology for chair evaluation. Applied
Drury, C. G., and Coury, B. G. (1982). A 
Ergonomics, 13, 195 — 202.
me
172
Ebe, K., and Griffin, M.J. (2001). Factors 
Ergonomics, 44(10), 901-921.
affecting static seat cushion comfort.
Eklund, J.A.E., and Corlett, E.N. 
seated work tasks. Clinical Biomechanics, 2 27 — 33
(1987). Evaluation of spinal loads and chair design in
J.A.E. and Corlett, E.N. (1985). Experimental and Biomechanical Analy 
Seating. In E.N.Corlett, J.Wilson and I.Manenica (eds.), The
Eklund, sis of
ergonomics of working 
postures: models, methods and cases. London: Taylor and Francis, pp. 319-330.
Evans, O., Collins, B., and Stewart, A. (1992). Unlocking potential for the future 
productivity and quality of life. In E.Hoffman and O. Evans (eds.) proceedings of the 
Annual Conference of the Ergonomics Society of Australia, Melbourne, 31-37.
Fernand, R., and Fox, D.E. (1985). Evaluation of a lumber lordosis: a prospective and 
retrospective study. Spine, 10, 799 - 803.
Fernandez, J.F., and Poonawala, M.F. (1998). How long should it take to evaluate seats 
subjectively. International Journal of Industrial Ergonomics, 22,483-487.
(1958) Anatomical and Physiological principles in chairFloyd, W.F., and Roberts, D.F. 
and table design. Ergonomics, 2, 1-16.
forward-sloping chair. AppliedFrancher, M. and Drury, C.G. (1985). Evaluation of a 
Ergonomics, 16 (1) 41-47.
• U o noon A methodology to determine the optimum 
Goonetilleke, R.S., and Feizhou, S. (2001).
«* depth. International Journal of Industrial Emononucs, 27,483- ■
change, department of 
University of Science
discomfort phase 
, Hong Kong
Goonetilleke, R.S. (1999). The comfort -
gineering management
Kowloon, Hong Kong.
industrial engineering and en 
and Technology, Clear Water Bay,
173
GoonetUleke, R.S. (1988). Designing to mi 
6(3), 12-19.
““imize discomfort. Ergonomics in Design,
Graf, M., Guggenbiihl, U. and H. Krueger. (1995). An assessment of seated activity and 
postures at five workplaces. International Journal of Industrial Ergonomics,
Graf, M., GuggenbUhl, U„ and Krueger, H. (1993). Investigations on the effects of seat 
shape, slope, posture, comfort and back muscle activity. International Journal of 
Industrial Ergonomics, 12, 91 - 103.
15(2), 81-90.
Grandjean, E., Boni, A., and Kretschmar, H. (1969). The development of rest chair profile 
for healthy and notalgic people. In E. Grandjean (ed.), Sitting Posture, London: Taylor 
and Francis, 193-201.
Grandjean, E., Hunting, W., Wotzka, G., and Scharer, R. (1973). An ergonomic 
investigation of multi-purpose chairs. Human Factors, 15,247 - 255.
Grandjean, E., Hunting, W., and Piedermann, M. (1983). VDT workstation design: 
preferred settings and their effects. Human Factors, 25,161-175.
(1984). Postural problems at office machine workstations. In E. GrandjeanGrandjean, E. •
(ed.). Economics and health to modem offices, London: Taylor and Frrncis, 445
ized offices, London: Taylor and Francis.
Grandjean, E. (1987). Ergonomics in computerize 
pp96- 156.
roblem and a new one. Ergonomics, 29(3), 345
Grieco, A. (1986). Sitting posture an old p 
-362.
174
Grieco, A., Molteni, G., and De Vit
C.M.Haslegrave and D.B.Chaffin (eds.), wlking p8^8 ^ NJ'Delleman’
evaluation and engineering, Boca Raton. Fla: CRC P
ostures and movements: Tools for
ress, pp. 144 - 155.
Orine,, P, and Legg, S. (2004). Musculoskeletal Disorders (MSD) in Students as a Risk 
Factor for Adult MSD: A Review of the Multiple Factors Affecting Posture, Comte 
Health in Classroom Environments. Journal of,he Humm-Enuironmemal System 7(1) 1
and
9.
Gross, C.M., Goonetilleke, R.S., Menon, K.K., Banaag, J.C.N., and Nair, C.M. (1994). 
The biomechanical assessment and prediction of seat comfort. In R. Lueder and K. Noro 
(eds.). Hard facts about soft machine: The ergonomics of seating, USA: Taylor & Francis, 
1900 Frost Road, Suite 101, Bristol PA 19007, pp. 231- 253.
Habsburg, S., and Middendorf, L. (1977). What is really connecting in seating comfort? 
Studies of correlates of static seat comfort (SAE Paper 770247). Warrendale, PA: Society 
of Automotive Engineers.
Hancock, P. A., and Pepe, A. A. (2005). Hedonomics: the power of positive and 
pleasurable ergonomics. Ergonomics in Design 13 (1), 8-14.
Hansen, L, JSrgensen, K, Krijnen, R, and Winkd, I. (1996). Significtmce of mat and 
shoe soilness during prolonged work in upright position: basal on measurements of low 
back muscle EMG, foot volume changes, discomfort and ground reach pp
Ergonomics, 29 (3), 217 - 224.
., and Troyanovich, S.J. (1999). 
Journal of Manipulative and
Croft, A.C., Harrison, D.E 
iew of the literature.
Harrison, D.D., Harrison, S.O
Sitting Biomechanics Parti: Review
594 - 609.Physiological Therapeutics, 22(9):
175
Typing Performance for COnf<”, "*
Industrial Ergonomics, 38(1) 35 _ 45 International Journal of
Helander, M. G. (2003). Forget about 
and comfort. Ergonomics, 46 (13/14), 1306 - 1319.
ergonomice in chair design? Focus on aesthetics
Helander, M. G., and Tham, M.P. (2003). Hedonomics 
Ergonomics, 46(13/14), 1269 - 1272.
— affective human factors design.
Helander, M. G,., and Zhang, L. (1997). Field studies of comfort and discomfort in sitting. 
Ergonomics, 40, 895 - 915.
Helander, M.G., and Mukund, S. (1991). The use of scaling techniques for subjective 
evaluation. In: Kumashiro, M., Megaw, E.D. (Eds.), Towards Human Work: Solution to 
Problems in Occupational health and safety. London: Taylor & Francis, pp. 193 - 200.
Helander, M.G., Little, S.E., and Drury, C.G. (2000). Adaptation and sensitivity to 
postural change in sitting. Human Factors, 42(4), 617 — 629.
. and Michel, D. (1995). Ergonomics of ergonomic furniture; AHelander, M. G., Zhang, L 
study of adjustability features. Ergonomics, 38,2007-2029.
. and Cary, J.M. (1987). An ergonomic evaluation
Helander, M.G., Czaja, S.J., Drury, C.G 
of office chairs. Office: Technology and People, 3,247-262.
Jr. (1989)- Micro break length,Henning, R„ Sauter, S., Salvendy, G. and Krieg, E
task. Ergonomics, 32, 855-804.
performance, and stress in a data entry
in sitting: pressure, patterns, and
Buttocks in 
ctions, 72, 39 - 47.
Hertzberg, H.T.E. (1972). The human 
Palliatives. American Automobile Transe
176
Heizberg, G.., Mausner, B., 
Somerset, NJ: Transaction Publishers.
and Snyderman, (1993). The motivation to work.
Hira, D.S. (1980). An ergonomics 
-221.
appraisal of educational desks. Ergonomics, 23(3),213
Hunting. W, Gnmdjem, E„ end Mueda, K. (1980). Conutaiued poitas » mbis 
machine operators. Applied Ergonomics, 11, 145 - 149.
Hunting, W., Laubli, T., and Grandjean, E. (1982). Constrained postures 
Ergonomics, 25, 556 - 557.
at VDTs.
International Restless Leg Syndrome Study Group (2003) Validation of the International 
Restless Leg Syndrome Study Group rating scale for restless leg syndrome. Sleep 
Medicine, 4, 121 - 132.
Jones, J.C. (1969) Methods and results of seating research. Ergonomics, 12 (2), 171 - 181.
Kamijo, K., Tsujimura, H., Obara, H., & Katsumata, M. (1982). Evaluation of seating 
comfort (SAE paper 820761). Warrendale, PA: Society of Automotive Engineers.
related to posture and seating.Keegan, J.J. (1953) Alterations of the lumbar 
Journal of Bone and Joint Surgery. 35A (3), 589 603.
(1962) Evaluation and improvement of seats
curve
. Industrial Medicine and
Keegan, J.J.
Surgery, 31, 471 - 477.
Kirk, N.S.,
in static work. Department of Human Sciences,
nurse-sensitivealizing the construct as
Kolcaba, K. (1992). Holistic comfort: Operation
15(1), I"10’
outcome. Advances in Nursing Science,
177
Kolcaba, K., and DiMarco, M.A. 
Pediatric Nursing. Pediatric Nursing, 31(3)
(2005). Comfort Theory 
187- 194.
Kosiak, M., Kubicek, W.G., Olsen, M Dan? rw ,f t . ,, ’ J.N., andKottke, FJ. (1958). Evaluation of
pres,™ as a factor m the prodocta of iscW ^ M p ^
- 629.
3nd Its Applications to
Kroemer, K.H.E. (1988). Ergonomic seats for
(ed.) Trends in human factors/ergonomics. North-Holland: Elsevier Science Publishers 
B.V. pp.313-320.
computer workstations. In F.Aghazadeh
Kyung, G., et al., (2007). Driver sitting comfort and discomfort (part 1) Use of subjective 
ratings in discriminating car seats and correspondence among ratings. International 
Journal of Industrial Ergonomics (in press).
LeCarpentier, E. F. (1969). Easy chair dimensions for comfort - a subjective approach, 
Ergonomics, 12 (2), pp 328 - 337.
Legg, S. J., Mackie, H.W. and Milicich, W. (2002). Evaluation of a prototype multi­
posture office chair. Ergonomics, 45(2), 153-163.
ing, J. (1993). Measuring seat comfort, SAE
,25-30.
Lee, K.S., Ferrraiuolo, P. and Temnnng,
Technical paper Series 930105(Troy, MI: Society of Automotive Engineers)
(1985). Experimental analysis of a visuo- 
and I.Manenica (eds.), 
London: Taylor and
Lepoutre, F.X., Roger, D. and Loslever, P.
■ E.N.Corlett, J.Wilson 
models, methods and cases.
postural system in an office workstation. In
The ergonomics of working postures. 
Francis, pp. 363-370.
e in a VDT task.mfort and performanc
(2000). Posture, discoLiao, M.H. and Drury, C.G. 
Ergonomics, 43(3), 345-359.
178
Lindegard, A., Karlberg, C„ Wigaeus Tomqvist, R, 
(2005). Concordance between VDU- 
experts’ observations of workplace 
319-325.
Toomingas, A., and Hagberg, M. 
users’ ratings of comfort and perceived exertion with 
layout and working postures. Applied Ergonomics, 36,
Link, C.S., Nicholson, G.G., Shaddeau, S.A., Birch, R., 
curvature in standing and sitting i 
flexor muscle length. Physical Therapy, 70, 611 - 618.
and Gossman, M. (1990). Lumber
in two types of chairs: relationship of hamstring and hip
Linton, S. J., Hellsing, A. L., Halme, T., and Akerstedt, K. (1994). The effects of 
ergonomically designed school furniture on pupil’s attitudes, symptoms and behavior. 
Applied Ergonomics 25, 299-304.
Lueder, R. (2002). Anatomical, physiological and health considerations relevant to the 
Swing Seat, Humanics Ergo Systems, Inc., www.humanics-es.com.
Lueder, R. K. (1983). Seat comfort: a review of the construct in the office environment. 
Human Factors, 25 (6), 701-711.
manner ofLundervold, A.J.S. (1951). Electromyographic investigation of position and 
working in typewriting. Acta Physio Scand, 84(suppl).
seated man (Homo Sedens), the seated work position, theory
Mandal, A.C. (1981). The 
and practice. Applied Ergonomics, 12,19-26.
correct height of furniture? In E. Grandjean (ed.), 
and Francis, 471 - 476. 
Psychological Review, 50, 370-396.
Mandal, A.C. (1984). What is the 
Erggonomics and health in modem o 
Maslow, A.H. (1943). A theory o
ffices, London: Taylor 
f human motivation.
of seating on human tasks and 
Human Factors and Industrial
F., (1980) The effects
of the Symposium
McLeod, P., Mandal, D.R. and Malvern 
perceptions. In: H.R. Poydar (Ed.), Proceedings
179
Design in Consumer Products. Development of Engin 
MA,pp. 117-126. eering Design, Tufts University, Medford,
Michel, D.D., and Helander, M.G. (1994). Effects of two typ 
change and comfort for individuals 
1231-1245.
es of chairs on stature 
with healthy and herniated discs. Ergonomics, 37,
Mukhopadhyay, P., O’Sullivan, L., and Gallwey, T. J. (2007). Estimating upper limb 
discomfort level due to intermittent isometric pronation torque with various combinations 
of elbow angles, forearm rotation angles, force and frequency with upper arm at 90° 
abduction. International journal of industrial Ergonomics, 37, 313 - 325.
Murphy, https://knol.google.eom/k/patrick-j-murphy/validity-in-empirical-social-science 
/324x8jble77k7/2#/2008/10/29.
Nachemson, A. (1975). Towards a better understanding of low-back pain: a review of the 
mechanics of the lumber discs. Rheumatology and Rehabilitation, 14,129-143.
Nachemson, A., and Elfstrom, G. (1970) Intravital dynamic pressure measurements in 
lumber discs. Scandinavian Journal of Rehabilitation Medicine, Suppl. 1.
measurements of intradiscal pressure.Nachemson, A., and Morris, J.M. (1964) In vivo 
Journal of Bone Joint Surgery, 46A, 1077.
L P.A. (2005). Anthropometry and the design of 
d N.Corlett (eds). Evaluation of human
Pheasant, S.T., and (Bea) Steenbekkers 
workspaces. In J.R.Wilson an 
Francis, pp.716-727.
work, NY: Taylor &
in agriculture.Observational Methods for analyzing working -.stores
, 169- 194.Pinzke, S. (1997)Journal of Agricultural safety and health, 3(3)
180
E'C <1982)-“ '““"Wm^.APP,MEv>no^ 13,„.42.
Rennie, A.M. (1981). The application of ergonomi 
Applied Ergonomics, 12(3), 163-168.
cs to consumer product evaluation.
Reijneveld, K., de Looze, M., Krause, F., and Desmet, P.M.A. (2003). Measuring the 
emotions elicited by office chairs. In Proceeding of the 2003 international
designing pleasurable products and interfaces; Pittsburgh, PA, USA, New York, NY: 
ACM Press, pp. 6-10.
conference on
Richards, L.G. (1980). On the psychology of passenger comfort. In D.J.Obome and J.A. 
Levis (eds). Human Factors in Transport Research. London: Academic press 2,15-23.
Robin Stuart-Kotze from www.managementleaming.com/2007/12/18
Salvendy, G. (2002). Use of subjective rating scores in ergonomics research and practice. 
Ergonomics, 45 (14), 1005 - 1007.
the automated office; gaps in 
In Salvendy, G. (ed.) Human-Computer Interaction. The
Sauter, S. L. and Arndt, R. (1984). Ergonomics in 
knowledge and practice.
Netherlands: Elsevier Science Publishers, pp-411-414.
., and Shipley, P. (1969). The assessment of chair comfort,
Shackel, B., Chidsey, K. D 
Ergonomics, 12, 269 - 306.
(1997). Validity and reliability of rating scales for seated
al Journal of Industrial Ergonomics, 20,441-461.
w w f2006) Subjective scales of effort and workload 
Sherehiy, B, and Karwowata, ^ Tte occupational ergonomics
assessment. In: W.S.Marras and
Shen, W., and Parsons, K.C. 
pressure discomfort. Intemation
181
handbook Fundamentals and as 
Francis, pp. 37-1 - 37-13.
sessment tools for occupational
ergonomics NY: Taylor &
Shvartz, E„ Guame, J.G., White, R.T., Riebold, R.C., tmd Glassford, E.J. (1980). Rifat 
of the circutone seat on hemodynamic, subjective and thermal responses during prolonged 
sitting. Proceedings of the Human Factors Society 24* Annual Meeting, 639 - 642.
Sinclair, M.A. (2005). Participative assessment. In 
Evaluation of human work, NY: Taylor & Francis, pp. 83-109.
J.R.Wilson and N.Corlett (eds).
Slater, K. (1985). Human comfort, Springfield, II.: Chrles C Thomas.
Slechta, R.F., Wade, E.A., Carter, W.K., and Forrest, J. (1957). Comparative evaluation 
of aircraft seating accommodation, TR (57 - 136), WADC, Wright-Patterson, Ohio.
Thakurta, K., Koester, D., Bush, N., and Bachle, S. (1995). Evaluating short and long 
term seating comfort. In SAE Technical Paper Series 950144 (Tory, MI: Society of 
Automotive Engineers), 33 - 37.
Thariq, M.G. and Munasinghe.H.P. (2005) comparative study of existing institutional chairs used
- Sri Lanka, 6(1).in Sri Tjmlra with special reference to design dimensions. Built-Environment
., Munasighe, H.P. (2010). Designing Chair with Mounted 
ics and Comfort. International Journal of Industrial
Thariq, M.G.M., Abeysekara, J.D 
Desktop for University Students: Ergonomics
ergonomics.
d Munasinghe, H.P. (Accepted for publication) 
in Laboratory Setting. Asian JournalThariq, M.G.M., Fang, W., Zhang, L., an 
Study of Factors of Sitting Comfort and Discomfort m
of Ergonomics.
Tewari, V.K., and Prasad, N. 
Comfortable tractor seat, Ergono
d backrest parameters form(2000). Optimum seat pan an
' mics, 43,167-186.
182
Trochim, W. M. (2004) The Research Methods Kn 
WWW page, at URL: <http://trochim.h 
as of).
owledge Base, 2nd Edition. Internet 
uman.comell.edu/kb/index.htm> (version current
van Dieen, I.H., De Looze, M.P., and Hemas, v. (2001). Effects „f dyMmic office 
chairs on trunk kinematics, trunk
739-750.
extensor EMG and spinal shrinkage. Ergonomics, 44,
Vergara, M. and Page, A. (2002a). System to measure the use of the backrest in sitting- 
posture office tasks. Applied Ergonomics, 31, 247 - 254.
Vergara, M. and Page, A. (2002b) Relationship between comfort and back posture and 
mobility in sitting-posture, Applied Ergonomics, 33,1-8.
Vink, P., Douwes, M. and van Woensel, W. (1994) Evaluation of a sitting aid: the Back- 
up, Applied ergonomics, 25(3), 170-176.
Vink, P., de Looze, M.P. and Kuijt-Evers, L.F.M. (2005a) Theory of comfort, in: Vink, P. 
(eds.), comfort and design Principles and good practice, CRC Press, London, 13-32.
Vink, P„ Overbeek, C.J., and Desmet, P.M.A. (2005b) Comfort experience.
(eds.). Comfort and design Principles and good practice: London: CRC Press, pp 1-12.
factors influencing seat
In: P. Vink
■ D.B. (1960). An analysis of someWachsler, R.A., and Learner, 
comfort. Ergonomics, 3,316- 320.
Webters New World Dictionary (1990) NY: Pocket Books.
fer, F.T. 0993). „
nt. Human Factors, 35,263 281.Wierwille, W.W., and Eggemeier 
measurement in a test and evaluation environm
183
r:«^r:: ^ m- a"4)'
Winkel, J., and Jorgensen, K. (1986) Evaluation of foot swelling 
temperatures in relation to leg activity during long-term seated office work. Erg 
29,313-328.
and lower-limb
onomics
Winkel, J„ and Westgaard, R. (1992). Occupational and individual risk 
shoulder-neck complaints: Part 11 - The scientific basis (literature review) for guide. 
International Journal of Industrial Ergonomics, 10, 85-104.
factors for
Yasukouchi, A., and Isayama, T. (1995) The relationship between lumber curves, pelvic 
tilt, and joint mobilities in different sitting postures in young adults. Applied Human 
Science, 14, 15 — 21.
Yun, M.H., Donges, L., and Freivalds, A. (1992). Using force sensitive resistors to 
evaluate the driver seating comfort, in S Kumar (ed.), Advances in Industrial ergonomics 
and Safty IV (London: Taylor and Fmacis), 403 - 410.
. Constrained standing: Evaluating theZhang, L., Drury, C., and Woolley, S.M. (1991) 
foot/floor interface. Ergonomics, 34(2), 175 - 192.
Comfort Assessment, Ph.Dto SittingZhang, L. (1992) Multidimensional Approach 
dissertation. Department 
Buffalo.
Zhang, L., Helander, M. Drury, C. G (1996) Identifying 
in seating. Human Factors, 38, 377 - 389.
of Industrial Engineering, State University of New York,
ins factors of comfort and discomfort
unication.Zhang, L., (2008) personal comm
184
J., Tang, L. (1994) An evaluation of comfort 
25(6)386-392.
Zhao,
of a bus seat. Applied Ergonomics,
Zacharkow, D. (1988) Posture: sitting, standing, chair design 
Charles C Thomas).
and exercise (Springfield IL:
185