108 References Abeysinghe, U. M., & Amarasekera, H. S. (2011). Pressure and non-pressure preservation methods for rubber wood treatment by Boron preservatives. Proceedings of International Forestry and Environment Symposium, 16(0). https://doi.org/10.31357/fesympo.v16i0.94 Abubakar, S., Liu, X., & Xiong, X. (2023). Biological Deterioration and Conservation of Ar-chaeological Wood: a review. Alade, A. A., Naghizadeh, Z., Wessels, C. B., & Tyhoda, L. (2022). A review of the effects of wood preservative impregnation on adhesive bonding and joint performance. Journal of Adhesion Science and Technology, 36(15), 1593–1617. Ali, M. R., Abdullah, U. H., Ashaari, Z., Hamid, N. H., & Hua, L. S. (2021). Hydrothermal modification of wood: A review. Polymers, 13(16), 2612. Altaner, C. (2022). Preservative Treated Timber Products in New Zealand. Cellulose Chemistry and Technology, 56(7–8), 705–716. https://doi.org/10.35812/cellulosechemtechnol.2022.56.62 Altgen, M., Willems, W., Hosseinpourpia, R., & Rautkari, L. (2018). Hydroxyl accessibility and dimensional changes of Scots pine sapwood affected by alterations in the cell wall ultrastructure during heat-treatment. Polymer Degradation and Stability, 152, 244–252. Amarasinghe, W. V. T. D., Terada, T., & Yamamoto, H. (2021). Enhancing the carbon sequestration of high-elevation Eucalyptus plantations in Sri Lanka for future carbon market activities. Journal of Forest Research, 26(5), 351–357. Antwi-Boasiako, C., & Amponsah, D. (2012). Compressive strength, static bending and specific gravity of chemically-treated stakes from three structural and general-purpose hardwoods. Journal of the Indian Academy of Wood Science, 9(2), 83–91. Arantes, V., & Goodell, B. (2014). Current understanding of brown-rot fungal biodegradation mechanisms: a review. Deterioration and Protection of Sustainable Biomaterials, 3–21. Article, R. (n.d.). i Forest. 10, 895–908. https://doi.org/10.3832/ifor2380-010 Ashwath, M. N., Sathish, B. N., Akshayakumari, A., Rashmitha, H. R., Leosh, D., & Devagiri, G. M. (2023). Suitability of Acrocarpus fraxinifolius as a Pulping Raw Material. Bakir, D., Dogu, D., Kartal, S. N., & Terzi, E. (2023). Evaluation of pit dimensions and uptake of preservative solutions in wood after permeability improvement by bioincising. Wood Material Science & Engineering, 18(1), 233–243. Binbuga, N., Ruhs, C., Hasty, J. K., Henry, W. P., & Schultz, T. P. (2008). Developing environmentally benign and effective organic wood preservatives by understanding the biocidal and non-biocidal properties of extractives in naturally durable heartwood. 62(3), 264–269. https://doi.org/doi:10.1515/HF.2008.038 109 Boonstra, M. (2008). A two-stage thermal modification of wood. Ghent University. Brischke, C. (2019). Timber. In Long-term Performance and Durability of Masonry Structures (pp. 129–168). Elsevier. Brischke, C., & Rapp, A. O. (2008). Influence of wood moisture content and wood temperature on fungal decay in the field: Observations in different micro- climates. Wood Science and Technology, 42(8), 663–677. https://doi.org/10.1007/s00226-008-0190-9 Brostow, W., Datashvili, T., & Miller, H. (2010). Wood and wood derived materials. Journal of Materials Education, 32(3), 125. Burpee, C. M. (n.d.). Pressure Treated Wood for Highway Construction. Caldeira, F. (2010). Boron in wood preservation. A review in its physico-chemical aspects. Silva Lusitana, 18(2), 179–196. Camuffo, D. (2018). Standardization activity in the evaluation of moisture content. Journal of Cultural Heritage, 31, S10–S14. Candelier, K., Thevenon, M.-F., Petrissans, A., Dumarcay, S., Gerardin, P., & Petrissans, M. (2016). Control of wood thermal treatment and its effects on decay resistance: a review. Annals of Forest Science, 73, 571–583. Cao, S., Cheng, S., & Cai, J. (2022). Research progress and prospects of wood high- temperature heat treatment technology. BioResources, 17(2), 3702. Carlquist, S. (2018). Living Cells in Wood 3. Overview; Functional Anatomy of the Parenchyma Network. Botanical Review, 84(3), 242–294. https://doi.org/10.1007/s12229-018-9198-5 Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020). Structure–property–function relationships of natural and engineered wood. Nature Reviews Materials, 5(9), 642–666. Civardi, C., Schwarze, F. W. M. R., & Wick, P. (2015). Micronized copper wood preservatives: An efficiency and potential health risk assessment for copper- based nanoparticles. Environmental Pollution, 200, 126–132. Claverie, M., Notaro, M., Fontaine, F., & Wery, J. (2020). Current knowledge on Grapevine Trunk Diseases with complex etiology: a systemic approach. Phytopathologia Mediterranea, 59(1), 29–53. https://doi.org/10.14601/Phyto- 11150 Croitoru, C., Patachia, S., & Lunguleasa, A. (2015). New method of wood impregnation with inorganic compounds using ethyl methylimidazolium chloride as carrier. Journal of Wood Chemistry and Technology, 35(2), 113–128. https://doi.org/10.1080/02773813.2014.892991 Damette, O., & Delacote, P. (2011). Unsustainable timber harvesting, deforestation and the role of certification. Ecological Economics, 70(6), 1211–1219. https://doi.org/https://doi.org/10.1016/j.ecolecon.2011.01.025 110 Daswatte, C. (2012). Sri Lanka Style: Tropical Design and Architecture. Tuttle Publishing. De Zoysa, M., & Inoue, M. (2008). Forest Governance and Community Based Forest Management in Sri Lanka: Past, Present and Future Perspectives. International Journal of Social Forestry, 1(1), 27–49. Derkyi, N. (2020). Azoles for renewable energy development and wood treatment. In Azoles-Synthesis, Properties, Applications and Perspectives. IntechOpen. Donaldson, L. A., & Radotic, K. (2013). Fluorescence lifetime imaging of lignin autofluorescence in normal and compression wood. Journal of Microscopy, 251(2), 178–187. Efhamisisi, D. (2015). Preservation of plywood against biological attack with low environmental impact using tannin-boron preservative. Université de Montpellier. Engelund, E. T., Thygesen, L. G., Svensson, S., & Hill, C. A. S. (2013). A critical discussion of the physics of wood-water interactions. Wood Science and Technology, 47(1), 141–161. https://doi.org/10.1007/s00226-012-0514-7 Fan, S., Gao, X., Pang, J., Liu, G., & Li, X. (2023). Enhanced Preservative Performance of Pine Wood through Nano-Xylan Treatment Assisted by High- Temperature Steam and Vacuum Impregnation. Materials, 16(11), 3976. Freeman, M. H., & McIntyre, C. R. (2008). Copper-based wood preservatives. Forest Products Journal, 58(11), 6–27. Frihart, C. R. (2015). Introduction to Special Issue Wood Adhesives : Past , Present , and Future. https://doi.org/10.13073/65.1-2.4 Gérardin, P. (2016a). New alternatives for wood preservation based on thermal and chemical modification of wood—a review. Annals of Forest Science, 73, 559– 570. Gérardin, P. (2016b). New alternatives for wood preservation based on thermal and chemical modification of wood — a review. Annals of Forest Science, 559–570. https://doi.org/10.1007/s13595-015-0531-4 Goli, G., Negro, F., Emmerich, L., & Militz, H. (2023). Thermal and chemical modification of wood–a combined approach for exclusive, high-demanding performance products. Wood Material Science & Engineering, 18(1), 58–66. Grosse, C., Noël, M., Thévenon, M., Rautkari, L., & Gérardin, P. (2018). Influence of Water and Humidity on Wood Modification with Lactic Acid. 6(3), 259–269. https://doi.org/10.7569/JRM.2017.634176 Hassan, B., & Fitzgerald, C. (2023). Potential of Gas-Propelled Aerosol Containing Synergized Pyrethrins for Localized Treatment of Cryptotermes brevis (Kalotermitidae: Blattodea). Insects, 14(6), 522. Hill, C., Altgen, M., & Rautkari, L. (2021). Thermal modification of wood—A review: 111 Chemical changes and hygroscopicity. Journal of Materials Science, 56, 6581– 6614. Himandi, S., Perera, P., Amarasekera, H., Rupasinghe, R., & Vlosky, R. P. (2021). Wood residues in the Moratuwa woodworking industry cluster of Sri Lanka: Potential for sector synergies and value-added products. Forest Products Journal, 71(4), 379–390. Homan, W. J., & Jorissen, A. J. M. (2004). Wood modification developments. Heron, 49(4), 361–385. Homan, W., Tjeerdsma, B., Beckers, E., & Jorissen, A. (2000). Structural and other properties of modified wood. World Conference on Timber Engineering, 5. Hristozov, D., Pizzol, L., Basei, G., Zabeo, A., Mackevica, A., Hansen, S. F., Gosens, I., Cassee, F. R., de Jong, W., & Koivisto, A. J. (2018). Quantitative human health risk assessment along the lifecycle of nano-scale copper-based wood preservatives. Nanotoxicology, 12(7), 747–765. Ibraheem, B. M., Aani, S. Al, Alsarayreh, A. A., Alsalhy, Q. F., & Salih, I. K. (2023). Forward Osmosis Membrane: Review of Fabrication, Modification, Challenges and Potential. Membranes, 13(4), 379. Järvinen, J., Ilgın, H. E., & Karjalainen, M. (2022). Wood preservation practices and future outlook: Perspectives of experts from Finland. Forests, 13(7), 1044. Johnson, M. G., Luxton, T. P., Rygiewicz, P. T., Reichman, J. R., Bollman, M. A., King, G. A., Storm, M. J., Nash, M. S., & Andersen, C. P. (2021). Transformation and release of micronized Cu used as a wood preservative in treated wood in wetland soil. Environmental Pollution, 287, 117189. Kamm, B., Kamm, M., Richter, K., Reimann, W., & Siebert, A. (2000). Investigation into the biotechnological modification of wood and its application in the wood- based material industry. Acta Biotechnologica, 20(3–4), 305–312. https://doi.org/10.1002/abio.370200311 Khazaei, J. (2008). Water Absorption Characteristics. Agronomical Research in Moldavia, XLI(2), 5–16. Kránitz, K., Sonderegger, W., Bues, C.-T., & Niemz, P. (2016). Effects of aging on wood: a literature review. Wood Science and Technology, 50, 7–22. Kretschmann, D. E. (2010). Chapter 5 - Mechanical Properties of Wood. Wood Handbook - Wood as an Engineering Material, 1–46. Kumar, A., Richter, J., Tywoniak, J., Hajek, P., Adamopoulos, S., Šegedin, U., & Petrič, M. (2017). Surface modification of Norway spruce wood by octadecyltrichlorosilane (OTS) nanosol by dipping and water vapour diffusion properties of the OTS-modified wood. Holzforschung, 72(1), 45–56. Lebow, S., Arango, R., Woodward, B., Lebow, P., & Ohno, K. (2015a). Efficacy of alternatives to zinc naphthenate for dip treatment of wood packaging materials. International Biodeterioration & Biodegradation, 104, 371–376. 112 Lebow, S., Arango, R., Woodward, B., Lebow, P., & Ohno, K. (2015b). Efficacy of alternatives to zinc naphthenate for dip treatment of wood packaging materials. International Biodeterioration and Biodegradation, 104, 371–376. https://doi.org/10.1016/j.ibiod.2015.07.006 Li, H., Zhang, F., Ramaswamy, H. S., Zhu, S., & Yu, Y. (2016). High-pressure treatment of Chinese fir wood: Effect on density, mechanical properties, humidity-related moisture migration, and dimensional stability. BioResources, 11(4), 10497–10510. Lian, M., Huang, Y., Liu, Y., Jiang, D., Wu, Z., Li, B., Xu, Q., Murugadoss, V., Jiang, Q., & Huang, M. (2022). An overview of regenerable wood-based composites: preparation and applications for flame retardancy, enhanced mechanical properties, biomimicry, and transparency energy saving. Advanced Composites and Hybrid Materials, 5(3), 1612–1657. Mai, C., Schmitt, U., & Niemz, P. (2022). A brief overview on the development of wood research. Holzforschung, 76(2), 102–119. Manga Bengono, D. M., Tamba, J. G., Zobo Mfomo, J., Fopah-Lele, A., Diboma, B. S., Banyuy, F. G., & Biwolé, A. B. (2023). Influence of the anatomical structure on the moisture sorption and thermodynamic properties of the African tropical woods. Heat and Mass Transfer, 59(1), 113–130. Mantanis, G. I. (2017). Chemical modification of wood by acetylation or furfurylation: A review of the present scaled-up technologies. BioResources, 12(2), 4478–4489. Marais, B. N., Brischke, C., & Militz, H. (2022). Wood durability in terrestrial and aquatic environments – A review of biotic and abiotic influence factors. Wood Material Science & Engineering, 17(2), 82–105. https://doi.org/10.1080/17480272.2020.1779810 Matsumura, J., Booker, R. E., Ridoutt, B. G., Donaldson, L. A., Mikajiri, N., Matsunaga, H., & Oda, K. (1999). Impregnation of radiata pine wood by vacuum treatment II: effect of pre-steaming on wood structure and resin content. Journal of Wood Science, 45, 456–462. Mendis, M., Perera, H., Dharmaratne, D., Amarasekera, H., Jayasinghe, R., & Halwatura, R. (2020). Preliminary investigation on ancient timber structures through microscopic analysis. 2020 From Innovation to Impact, FITI 2020, 0–4. https://doi.org/10.1109/FITI52050.2020.9424882 Mendis, M S, & Halwatura, P. A. U. I. R. U. (2023). Impacts of chemical modification of wood on water absorption : a review. Journal of the Indian Academy of Wood Science, 20(1), 73–88. https://doi.org/10.1007/s13196-023-00309-y Mendis, M S, Halwatura, R. U., Somadeva, D. R. K., & Jayasinghe, R. A. (2020). Spectroscopic Determination of Chemical Elements on Abundantly Available Five Leaf Types in Tropics. 9Th Ysf Symposium, 4(4), 31. Mendis, M S, Ishani, P. A. U., & Halwatura, • R U. (n.d.). Impacts of chemical modification of wood on water absorption: a review. 113 https://doi.org/10.1007/s13196-023-00309-y Mendis, Malsha S., Rajapaksha, M., & Halwatura, R. U. (2020). Unleashing the potentials of traditional construction technique in bio-climatic building designs: A case of Ambalam, Sri Lanka. International Journal of Environmental Science and Development, 11(6), 298–304. https://doi.org/10.18178/ijesd.2020.11.6.1266 Mendis, Malsha S., & Umesh Halwatura, R. (2019). Decoding the societal transitions on environmental innovation under vernacular timber construction practice in Sri lanka. 2019 From Innovation to Impact, FITI 2019, 1–6. https://doi.org/10.1109/FITI49428.2019.9037628 Millat-e-Mustafa, M. (2001). A review of forest policy trends in Bangladesh. 0(June), 114–121. http://www.communityforestry.lk/wp- content/uploads/2012/researchpapers/A Review of Forest Policy Trends in Sri Lanka.PDF Mishra, B., & Singh, R. K. (2023). Sustainable Operations in Paper and Pulp Industry : Analysis of Challenges. Mohebby, B., Sharifnia-Dizboni, H., & Kazemi-Najafi, S. (2009). Combined hydro- thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification. Proceeding of 4th European Conference on Wood Modification (ECWM4), Stockholm, Sweden, 15, 353–360. Morais, S., Fonseca, H. M. A. C., Oliveira, S. M. R., Oliveira, H., Gupta, V. K., Sharma, B., & de Lourdes Pereira, M. (2021). Environmental and health hazards of chromated copper arsenate-treated wood: A review. International Journal of Environmental Research and Public Health, 18(11), 5518. Morozovs, A., & Bukšāns, E. (2009). Fire performance characteristics of acetylated ash (Fraxinus excelsior L.) wood. Wood Material Science & Engineering, 4(1– 2), 76–79. https://doi.org/10.1080/17480270903315580 Narasimhamurthy. (2022). Preservation of Engineered Wood Composites (Solid Wood Plywood, Blockboards/Flush Doors) Made from Plantation Timbers BT - Science of Wood Degradation and its Protection (R. Sundararaj (ed.); pp. 625– 646). Springer Singapore. https://doi.org/10.1007/978-981-16-8797-6_18 Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S., & Mason, P. (2020). Laser incising of wood: A review. Lasers in Engineering, 45(4–6), 381–403. Nyrud, A. Q., Bringslimark, T., & Bysheim, K. (2014). Benefits from wood interior in a hospital room: A preference study. Architectural Science Review, 57(2), 125– 131. https://doi.org/10.1080/00038628.2013.816933 Owoyemi, J. M. (2010). The influence of preservative viscosity on fluid absorption by Gmelina arborea wood. For. For. Prod. J, 3, 32–39. Owoyemi, J. M., Oyebamiji, W. O., & Aladejana, J. T. (2015). Drying Characteristics 114 of Three Selected Nigerian Indigenous Wood Species Using Solar Kiln Dryer and Air Drying Shed. American Journal of Science and Technology, 2(4), 176–182. http://www.aascit.org/journal/ajst P.Sudeshika. (2019). a Study on Most Abundantly Utilized Timber for Structural. December, 107–114. Paul, A., Laurila, T., Vuorinen, V., & Divinski, S. V. (2014). Thermodynamics, diffusion and the kirkendall effect in solids. In Thermodynamics, Diffusion and the Kirkendall Effect in Solids (Vol. 9783319074). https://doi.org/10.1007/978- 3-319-07461-0 Pavia, K. J. (2006). A review of double-diffusion wood preservation suitable for Alaska. USDA Forest Service - General Technical Report PNW, 676, 1–23. Perera, P., Rupasinghe, R. L., Weerasekera, D., Vlosky, R., & Bandara, R. (2022). Revisiting Forest Certification in Sri Lanka: The Forest Management and Export Wood-Based Manufacturing Sector Perspectives. Forests, 13(2), 1–18. https://doi.org/10.3390/f13020179 Pramreiter, M., Nenning, T., Malzl, L., & Konnerth, J. (2023). A plea for the efficient use of wood in construction. Nature Reviews Materials, 8(4), 217–218. https://doi.org/10.1038/s41578-023-00534-4 Pushpakumara, B. H. J., Gunasekara, M. T., & Abhayathunge, U. I. (2023). Investigation on mechanical and of Sri Lankan timber species for construction applications. Case Studies in Construction Materials, 19, e02269. https://doi.org/https://doi.org/10.1016/j.cscm.2023.e02269 Reinprecht, L., & Repák, M. (2019). The impact of paraffin-thermal modification of beech wood on its biological, physical and mechanical properties. Forests, 10(12), 1102. Repola, J. (2006). Models for vertical wood density of Scots pine, Norway spruce and birch stems, and their application to determine average wood density. Silva Fennica, 40(4), 673–685. https://doi.org/10.14214/sf.322 Richter, C. (2015). Wood characteristics: Description, causes, prevention, impact on use and technological adaptation. Wood Characteristics: Description, Causes, Prevention, Impact on Use and Technological Adaptation, 1–222. https://doi.org/10.1007/978-3-319-07422-1 Rowell, R. M. (2006). Chemical modification of wood: A short review. Wood Material Science & Engineering, 1(1), 29–33. https://doi.org/10.1080/17480270600670923 Rowell, R. M., & Ellis, W. D. (1984). Effects of Moisture on the Chemical Modification of Wood with Epoxides and Isocyanates. 16(2), 257–267. Rowell, R. M., Ibach, R. E., McSweeny, J., & Nilsson, T. (2009). Understanding decay resistance, dimensional stability and strength changes in heat-treated and acetylated wood. Wood Material Science & Engineering, 4(1–2), 14–22. 115 https://doi.org/10.1080/17480270903261339 Roy, A., Manna, K., Dey, S., & Pal, S. (2023). Chemical modification of β- cyclodextrin towards hydrogel formation. Carbohydrate Polymers, 120576. Ruwanpathirana, B. N. (1880). T imber Utilization in Sri Lanka 1 . Timber resources in Sri Lanka. Ruwanpathirana, N. D. (2012). Sustainable utilization of timber resources in Sri Lanka. SOBA, Ministry of Environment, Sri Lanka, 56–70. Sandberg, D., Kutnar, A., & Mantanis, G. (2017a). Wood modification technologies- a review. Iforest-Biogeosciences and Forestry, 10(6), 895. Sandberg, D., Kutnar, A., & Mantanis, G. (2017b). Wood modification technologies - A review. IForest, 10(6), 895–908. https://doi.org/10.3832/ifor2380-010 Saranpää, P. (2003). Wood density and growth. Wood Quality and Its Biological Basis, 87–117. Sargent, R. (2022). Evaluating dimensional stability in modified wood: an experimental comparison of test methods. Forests, 13(4), 613. Sarıoğlu, E., Turhan, E. A., Karaz, S., Bengü, B., Biçer, A., Yarıcı, T., Erkey, C., & Senses, E. (2023). A facile method for cross-linking of methacrylated wood fibers for engineered wood composites. Industrial Crops and Products, 193, 116296. Schmid, J., Brandon, D., Werther, N., & Klippel, M. (2019). Technical note - Thermal exposure of wood in standard fire resistance tests. Fire Safety Journal, 107, 179– 185. https://doi.org/https://doi.org/10.1016/j.firesaf.2018.02.002 Schubert, M., Panzarasa, G., & Burgert, I. (2022). Sustainability in wood products: a new perspective for handling natural diversity. Chemical Reviews, 123(5), 1889– 1924. Schultz, T. P., Nicholas, D. D., & Preston, A. F. (2007). A brief review of the past, present and future of wood preservation. Pest Management Science: Formerly Pesticide Science, 63(8), 784–788. Sedhain, G. (2023). Surface Modification of Wood Using Nano-Sized Titania Particles Coated by Liquid-Precursor Flame Spray Pyrolysis. Mississippi State University. Service, F., & Simpson, W. T. (1993). Specific Gravity , Moisture Content , and Density Relationship for Wood. Gen Tech Rep FPLGTR76 Madison WI US Department of Agriculture Forest Service Forest Products Laboratory 13 P, Gen. Tech., 13. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.155.4926&rep=r ep1&type=pdf Shirmohammadli, Y., Hashemi, A., & Masoudnia, R. (n.d.). EXPERIMENTAL AND NUMERICAL INVESTIGATION OF CROSS- LAMINATED TIMBER JOINTS WITH MULTIPLE GLUED-IN RODS. 1389–1396. 116 Shukla, S. R., & Kamdem, D. P. (2012). Effect of copper based preservatives treatment of the properties of southern pine LVL. Construction and Building Materials, 34, 593–601. Sikkema, R., Dallemand, J. F., Matos, C. T., van der Velde, M., & San-Miguel-Ayanz, J. (2017). How can the ambitious goals for the EU’s future bioeconomy be supported by sustainable and efficient wood sourcing practices? Scandinavian Journal of Forest Research, 32(7), 551–558. https://doi.org/10.1080/02827581.2016.1240228 Singh, S., Davey, S., & Cole, M. (2010). New Zealand Journal of Forestry Science 40 (2010) 199-209. New Zealand Journal of Forestry Science, 40, 199–209. http://www.scopus.com/inward/record.url?eid=2-s2.0- 77955440077&partnerID=tZOtx3y1 Sjostrom, E. (2013). Wood chemistry: fundamentals and applications. Elsevier. Spear, M. J., Curling, S. F., Dimitriou, A., & Ormondroyd, G. A. (2021). Review of functional treatments for modified wood. Coatings, 11(3), 327. Srivastava, R. K., Shetti, N. P., Reddy, K. R., Nadagouda, M. N., Badawi, M., Bonilla- Petriciolet, A., & Aminabhavi, T. M. (2023). Valorization of biowastes for clean energy production, environmental depollution and soil fertility. Journal of Environmental Management, 332, 117410. https://doi.org/https://doi.org/10.1016/j.jenvman.2023.117410 Sudeshika, D. M. P., Mendis, M. S., & Halwatura, R. U. (2019). A study on most abundantly utilized timber for structural application in Sri Lanka. Sudeshika, D. M. P., Mendis, M. S., & Halwatura, R. U. (2020). Investigation on the Mechanical Property Variation on Timber Caused Due to the Thermal and Chemical Modification. MERCon 2020 - 6th International Multidisciplinary Moratuwa Engineering Research Conference, Proceedings, July, 78–83. https://doi.org/10.1109/MERCon50084.2020.9185330 Tamblyn, N. E. (1985a). Treatment of wood by diffusion. Tamblyn, N. E. (1985b). Treatment of wood by diffusion. In Preservation of Timber in the Tropics (pp. 121–140). Springer. Tarmian, A., Zahedi Tajrishi, I., Oladi, R., & Efhamisisi, D. (2020). Treatability of wood for pressure treatment processes: a literature review. European Journal of Wood and Wood Products, 78, 635–660. Taylor, P., Rowell, R. M., Fs, U., & Rowell, R. M. (2006). Wood Material Science & Engineering Chemical modification of wood : A short review Chemical modification of wood : A short review. January 2015, 37–41. https://doi.org/10.1080/17480270600670923 Teng, T.-J., Arip, M. N. M., Sudesh, K., Nemoikina, A., Jalaludin, Z., Ng, E.-P., & Lee, H.-L. (2018). Conventional technology and nanotechnology in wood preservation: A review. BioResources, 13(4), 9220–9252. 117 Thybring, E. E., & Fredriksson, M. (2021). Wood modification as a tool to understand moisture in wood. Forests, 12(3), 1–18. https://doi.org/10.3390/f12030372 Thybring, E. E., & Fredriksson, M. (2023a). Wood and Moisture. In Springer Handbook of Wood Science and Technology (pp. 355–397). Springer. Thybring, E. E., & Fredriksson, M. (2023b). Wood and Moisture BT - Springer Handbook of Wood Science and Technology (P. Niemz, A. Teischinger, & D. Sandberg (eds.); pp. 355–397). Springer International Publishing. https://doi.org/10.1007/978-3-030-81315-4_7 Toan, D. (n.d.). Methods of Determining the Moisture Content of Wood. Townsend, T. G., Dubey, B., Solo-gabriele, H., & Gainesville, P. O. B. (2011). ASSESSING POTENTIAL WASTE DISPOSAL IMPACT FROM PRESERVATIVE TREATED WOOD PRODUCTS Department of Environmental Engineering Sciences , University of Florida , Department of Civil , Architectural and Environmental Engineering , University of Miami , Coral Ga. October, 1–19. Tsapko, Y., Horbachova, O., Mazurchuk, S., & Bondarenko, O. (2021). Study of resistance of thermomodified wood to the influence of natural conditions. IOP Conference Series: Materials Science and Engineering, 1164(1), 12080. Usta, I. (2004). The effect of moisture content and wood density on the preservative uptake of Caucasian fir (Abies nordmanniana (Link.) Spach.) treated with CCA. Turkish Journal of Agriculture and Forestry, 28(1), 1–7. https://doi.org/10.3906/tar-0308-6 Van Acker, J., Van den Bulcke, J., Forsthuber, B., & Grüll, G. (2023). Wood Preservation and Wood Finishing. In Springer Handbook of Wood Science and Technology (pp. 793–871). Springer. Walker, J. C. F., Archer, K., & Lebow, S. (2006). Wood preservation. Primary Wood Processing: Principles and Practice, 297–338. Wang, D., Fu, F., & Lin, L. (2022). Molecular-level characterization of changes in the mechanical properties of wood in response to thermal treatment. Cellulose, 29(6), 3131–3142. Wegner, T., Skog, K. E., Ince, P. J., & Michler, C. J. (2010). Uses and Desirable Properties of Wood in the 21st Century. Journal of Forestry, 108(4), 165–173. https://doi.org/10.1093/jof/108.4.165 Weththasinghe, K. K., Akash, A., & Harding, T. (2022). Carbon footprint of wood and plastic as packaging materials–An Australian case of pallets. Journal of Cleaner Production, 363, 132446. Widehammar, S. (2004). Stress-strain relationships for spruce wood: Influence of strain rate, moisture content and loading direction. Experimental Mechanics, 44, 44–48. Wijesinghe, L. C. A. de S. (2003). Forestry in Sri Lanka a voyage through time. 118 Wimmers, G. (2017). Wood: A construction material for tall buildings. Nature Reviews Materials, 2, 1–3. https://doi.org/10.1038/natrevmats.2017.51 Wood - Densities of Various Species. (n.d.). Retrieved June 21, 2023, from https://www.engineeringtoolbox.com/wood-density-d_40.html Wrigley, E. A. (2017). The supply of raw materials in the industrial revolution. In The causes of the industrial revolution in England (pp. 97–120). Routledge. Xie, Y., Fu, Q., Wang, Q., Xiao, Z., & Militz, H. (2013). Effects of chemical modification on the mechanical properties of wood. Eur. J. Wood Wood Prod, 71(4), 401–416. Yildiz, S., & Gümüşkaya, E. (2007). The effects of thermal modification on crystalline structure of cellulose in soft and hardwood. Building and Environment, 42(1), 62–67. Yu, C. W. F., & Kim, J. T. (2012). Long-term impact of formaldehyde and VOC emissions from wood-based products on indoor environments; and issues with recycled products. Indoor and Built Environment, 21(1), 137–149. Yuan, Z., Dai, W., Zhang, S., Wang, F., Jian, J., Zeng, J., & Zhou, H. (2022). Heterogeneous strategies for selective conversion of lignocellulosic polysaccharides. Cellulose, 29(6), 3059–3077. https://doi.org/10.1007/s10570- 022-04434-8 Zelinka, S. L., Altgen, M., Emmerich, L., Guigo, N., Keplinger, T., Kymäläinen, M., Thybring, E. E., & Thygesen, L. G. (2022). Review of Wood Modification and Wood Functionalization Technologies. Forests, 13(7), 1–46. https://doi.org/10.3390/f13071004 Zeng, X., Jin, Q., Wang, P., & Huang, C. (2023). Distribution and Speciation of Heavy Metal(loid)s in Soils under Multiple Preservative-Treated Wooden Trestles. Toxics, 11(3), 249. https://doi.org/10.3390/toxics11030249 Zhang, N., Li, S., Xiong, L., Hong, Y., & Chen, Y. (2015). Cellulose-hemicellulose interaction in wood secondary cell-wall. Modelling and Simulation in Materials Science and Engineering, 23(8). https://doi.org/10.1088/0965-0393/23/8/085010 Žigon, J., & Pavlič, M. (2023). Assessment of the Combined Charring and Coating Treatments as a Wood Surface Protection Technique. Forests, 14(3), 440. H.Amarsekera,W.C.Dheerasekera. (2007). Study on Cane Furniture industries at Wewaldeniya ans Wood- based Furniture industries at Moratuwa. Sri Lanka: National Enterprise Development Authority - NEDA. 119 Amarasekera, H. (2023, 01 13). Construction timber in Sri Lanka - future trends and technologies. Nugegoda: University of Sri Jayewardenepura. Retrieved from http://dr.lib.sjp.ac.lk/handle/123456789/12565 Amarasinghe W.V.T.D., M. C. (2021). The Effect of Incising on Coal-Tar Creosote Treated Wooden Sleepers to Increase Retention. Proceedings of International Forestry and Environment Symposium. Nugegoda, Sri Lanka: University of Sri Jayewardenepura.