111 
 
References 
ABAQUS (2007), ABAQUS User’s Manual, Version 6.7, Dassault Systemes, RI, 2009. 
Annual Report of the Monetary Board 2015, Central Bank of Sri Lanka, 26 April 2016. 
ANSI/TIA-222-G (2005), Structural Standard for Antenna Supporting Structures and 
Antennas, Telecommunications Industry Association, USA. 
ASCE 10-97 (2000), Design of Lattice steel transmission structures, American Society 
of Civil Engineers, Varginia, USA. 
Ayyappen, K., Thiruvenkatasamy K., ArumugamT., “Impact assessment study of 
cyclone Vardah on Chennai on East coast of Tamil Nadu, India”, TERI information 
Digest on energy and environment, Volume 16, No. 01 March 2017. 
Ballantyne, D. (2006), “Sri Lanka Lifelines after the December 2004 Great Sumatra 
Earthquake and Tsunami” Earthquake Spectra, Volume 22, No. S3, pages S545–
S559, Earthquake Engineering Research Institute.  
BNBC 1993 (2006), Bangladesh National Building Code, Ministry of Work, 
Bangladesh. 
BS 5950: Part 1:1990 (1990), Structural use of steelwork in buildings, British Standard 
Institution, London, England. 
Brain, M. McDonald, Birringer R., “Moss landing tower collapse analysis”, Exponent 
Inc, USA, 2015.   
Building Code of Pakistan (Seismic provision -2007) (2007), Ministry of Housing & 
work, Islamabad, Pakistan. 
Dananjaya, R. M. S., Dissanayake, P. B. R., Seneviratne, K. G. H. C. N. ,Wijesundara, 
K.K. (2014), “Simulation of Bedrock Motion to Obtain PGA Values”, 10th 
International Conference of the International Institute for Infrastructure Resilience 
and Reconstruction (I3R2), 20–22 May 2014, Purdue University, West Lafayette, 
Indiana, USA, pp 38-41. 
Davidson, B., Owens, G.W. (2003),Steel Designer’s Manual -6th edition, The Steel 
Construction Institute , Blackwell Science LTD, Oxford, London. 
Design of buildings for high winds-Sri Lanka, Ministry of Local Government, Housing 
and Construction, Sri Lanka, 1980.   
Eidinger, J.M., Kemper, L., G & E Engineering Systems Inc. and Bonneville 
Administration (2012), ”Reliability of transmission towers under extreme wind and 
ice loading”,   US CIGRE, Paris session – online publication.  
112 
 
EN 1993-3-2 (2006), Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts 
and chimneys Chimneys, Management Centre: rue de Stassart, 36 B-1050 Brussels. 
EN 1998-6 (2005), Eurocode 8: Design of structures for earthquake resistance – Part 6: 
Towers, masts and chimneys, Management Centre: rue de Stassart, 36 B-1050 
Brussels. 
Fisher, J.M., Kloiber, L.A. (2006), Base Plate and Anchor Rod Design – 2nd Edition , 
American Institution of Steel Construction, Minnesota, USA. 
Fenwick, T. (2011), “Emergency Telephone call service and the February 2011 
Christchurch Earthquake”, Review for the Ministry of Economic Development, 
New Zealand.   
Galvez, C. and McClure, G. (1995),”A Simplified Method for Aseismic Design of Self 
Supporting Lattice Telecommunication Tower”, Proceedings of the 7th Canadian 
Conference on Earthquake Engineering, Montreal, 5-7 June, pp 541-548. 
Galvez, C. (1995), “Static Method For Aseismic Design of Self-Supporting Towers”, 
M.Eng. Project Report G95-OS, Department of Civil Engineering and Applied 
Mechanics, McGill University, Montreal, Canada. 
Ghodrati Amiri, G., Barkhordari, M.A., Massah, S.R., Vafaei, M.R.(2007), 
“Earthquake Amplification Factors for self-supporting 4-legged 
Telecommunication Towers” , World Applied Science Journal 2(6):635-643. 
Ghodrati Amiri, G., Boostan, A. (2002), “Dynamic Response of Antenna Supporting 
Structures”, 4th Structural Specialty Conference of the Canadian Society of Civil 
Engineers, Canada. 
Goda, K., Kiyota, T., Pokhrel, R.M., Chiaro, G., Katagiri, T., Sharma, K. (2015), 
“Gorkha-Nepal Earthquake: Insights from Earthquake Damage Survey”, Frontiers 
in Built Environment 1, 2015, Article 8, pp.1-15Hogan, T.J., Thomas, I.R. (1994), 
“Design of structural connections”, 4th Edition, Australian Institute of Steel 
Construction, Sydney, Australia. 
IS802( Part l/Sec 1 ) :1995 (reaffirmed 2006) (2006),  Indian Standard-  Use of 
Structural steel in overhead transmission line towers – Code of practices part 1 
Material, Loads and Permissible stresses, Bureau of Indian Standard, New Delhi, 
India. 
IS 875:2002 (2002), Wind Loads on Buildings and Structures, Bureau of Indian 
Standard, New Delhi, India. 
113 
 
IS 1893: Part 1:2002 (2002), Indian Standard Criteria for Earthquake resistance, Bureau 
of Indian Standard, New Delhi, India. 
IS 1893:Part 4 (2005), Criteria for Earthquake Resistant Design of Structures, Part 4: 
Industrial Structures Including Stack-Like Structures, Bureau of Indian Standard, 
New Delhi, India. 
Khedr, M.A.H. (1998), ”Seismic Analysis of lattice towers”, PhD Report, Department 
of Civil Engineering and Applied Mechanics, McGill University, Montreal, 
Canada. 
Komo, T. and Kimura, E. (1973), “Earthquake Effects on Steel Tower Structures A top 
Building”, World Conference of earthquake Engineering, Vol. 1, 1 84-1 93. 
Liu, H., Liu, Y., Li Z., Huang, H. (2018), “Limit analysis for stiffened eight-bolted base 
plate connection in EHV transmission towers”, Journal of Construction Steel 
Research 145(2018), 70-81. 
Long, X., Wang, W., Fan, J. (2018), “Collapse Analysis of Transmission Tower 
Subjected to Earthquake Ground Motion”, Hindawi- Modelling and Simulation in 
Engineering, Volume 2018, Article ID 2687561, 20 pages. 
Maduranga, W.L.S., Lewanagamage, C.S. (2018), “Development of wind loading maps 
for Sri Lanka for use with different wind loading codes”, Engineer – 
Vol.L1,No.03,The Institution of Engineers, Sri Lanka, pp 47-55. 
Mallee, R., Burkhardt, F. (2001), “Fixing with Anchors: concerning relevant baseplate 
thickness” International Symposium on Connection between steel and concrete, 
Stuttgart, Germany, 
Mckenzie, W.M.C. (1998), “Design of steelwork to BS 5950 and C-EC3”, Macmillan 
Press LTD, Hampshire, London. 
Mikus, J. (1994), “Seismic Anaiysis of Self-Supponing Telecommunication Towers”, 
M. Eng. Project Report G94-10, Department of Civil Engineering and Applied 
Mechanics, McGill University, Montreal, Canada. 
Murray, T. M. (1983), “Design of Lightly Loaded Column Base Plates” Engineering 
Journal -Fourth Quarter, American Institute of Steel Construction, 143-152. 
NBC 104:1994 (2003), Nepal National Building Code, Department of Urban 
Development and Building Construction, His Majesty’s government of Nepal, 
Kathmandu, Nepal. 
NBC 105: 1994 (1994), Seismic Design of Buildings in Nepal, Ministry of Physical 
Planning and Works, Kathmandu, Nepal. 
114 
 
Osgoie, M.G. (2012), “A survey of earthquake-induced damage to telecommunications 
towers (1999-2011)”, Structural Engineering Series Report No. 2012-15, 
Department of Civil Engineering and Applied Mechanics, McGill University, 
Montreal, Canada. 
Patil Vidya, M., Lande Abhijeet, C. (2015), “Structural Response of Lattice Steel Masts 
for Seismic Loading”, IOSR Journal of Mechanical and Civil Engineering (IOSR-
JMCE), Volume 12, Issue 6 Ver. IV (Nov. - Dec. 2015),PP: 36-42. 
Pavan Kumar, M., Marakandeya Raju, P., Navya, M., Naidu, G.T., “Effect of wind 
speed on structural behaviour of monopoles & self-supporting telecommunication 
towers”, Asian Journal of Civil Engineering, Vol.18, No.06 (2017), pp 911-927. 
Peiris, L.M.N. (2008), “Seismic Hazard Assessment of Sri Lanka and Seismic Risk in 
Colombo”, Risk Management Solutions, London, UK. 
Razak, H.A. (2015), “Telecommunication towers assessment system in consideration 
of earthquake effects in Malaysia”, 40th Asia Pacific Advance Network Meeting, 
Kuala Lampur, Malaysia, 10-14. 
Report of the standing committee of export on failure of towers during October 2014 
to June 2015, CEA-India, 2016. 
SAP 2000 version 14.0.0 (2009)- User’s Manual, Computer and Structures, Inc. , 
Berkeley, CA, 2009. 
Schiff, A.J. (1999), “Case Study of Earthquake Performance of Communication 
Towers”, Prepared for the Electric Power and Communication Committee, 
Technical Council on Lifeline Earthquake Engineering (TCLEE), American 
Society of Civil Engineers. 
Steel Design Guide Series -16, “Flush and extended multiple - row Moment- End plate 
connections”, American Institute of Steel Construction, Chicago, USA, 2003. 
Suresh Kumar, K., Cini, C., Valerie, S. (2012), “Assessment of design wind speeds for 
metro cities of India”, The Seventh International Colloquium on Bluff Body 
Aerodynamics and Applications (BBAA7),Shanghai, China; September 2-6, 2012. 
 Syam, A.A., Chapmen, B.G. (1996), “Design of Structural Steel hollow section 
Connections- Volume 1: Design Models”, Australian Institute of Steel 
Construction, Sydney, Australia. 
Uduweriy, S.B., Wijesundara, K.K., Dissanayake, P.B.R. (2013), “Seismic risk in 
Colombo-probabilistic approach”, in: SAITM Research Symposium on 
Engineering Advancement (SAITM-RSEA2013), pp124-128. 
115 
 
Uni-Consultancy Services, University of Moratuwa, Sri Lanka, Environmental 
screening report for embankment protection of Dehiwala Canal from the Galle Road 
Bridge to close to the sea outfall and removal of localized rock outcrops from the 
canal bed, Final Report, 2011. 
Venkatesan, S., Lam, N., De Silva, S. (2017), “Design response spectra for Sri Lanka”, 
The 2017 world congress on Advances in Structural Engineering and Mechanics 
(ASEM 17), 28 August – 01 September 2017, Iisan (Seoul) , Korea. 
Wilkinson, T., Daniels, A., Wilton, M., Wood, D. (2000), “Uplift tests on column 
baseplate connections”, Advances in Steel structures, Vol. 11. 
Willibald, S. (2003), “Bolted Connections for Rectangular Hollow Sections under 
Tensile Loading”, PhD thesis, University of Toronto, Canada. 
www.gfz-postdam.de/en/GSHAP. 
www.hikenow.net- Hambantota photo. 
www.trc.gov.lk - Telecommunication statistics of Sri Lanka. 
www.usgs.gov - Global Seismic design data.