Institutional-Repository, University of Moratuwa.  

Browsing Faculty of Engineering Research Unit (ERU & MERCon) by Year "2013"

Browsing Faculty of Engineering Research Unit (ERU & MERCon) by Year "2013"

Sort by: Order: Results:

  • Jayawardhana, MKPR; Kumara, PKAM; Paranawithana, WDAI; Anjitha, T; Weerawarana, SM [Conference-Full-text]
    Through the past years, traditional telecom customer base has escalated with wide usage of mobiles. But the services and promotions offered by the service providers has been limited to a specific frame, without extracting ...
  • Jayawardhana, MKPR; Kumara, PAKM; Perera, TDK; Paranawithana, WDAI; Anjitha, T; Weerawarana, SM [Conference-Full-text]
    Through the past years, traditional telecom customer base has escalated with wide usage of mobiles. But the services and promotions offered by the service providers has been limited to a specific frame, without extracting ...
  • Sharma, K; Carnage, C [Conference-Full-text]
    Enterprises continually seek innovative approaches to reduce operational computing costs while extracting the maximum utility from their resources. Cloud Computing technology play a major role in helping organizations ...
  • Wanasinghe, DD; Adikary, SU [Conference-Full-text]
    In this research clay deposits located in the Nachchaduwa area were investigated to identify suitable ceramic fabrication techniques and products. Deposits located in this area are known to be rich in Kaolinite and Montmorillonite ...
  • Wanasinghe, DD; Adikary, SU [Conference-Full-text]
    In this research clay deposits located in the Nachchaduwa area were investigated to identify suitable ceramic fabrication techniques and products. Deposits located in this area are known to be rich in Kaolinite ...
  • Sampath, BG; Wijesiri, NRAAR; Pitahawatte, JMLMGB; Dassanayake, VPC [Conference-Full-text]
    This paper presents the design, analysis and testing oj a control system Jor a quadrotor. The research is focused on the maneuverability oj the quadrotor hence the mechanical design was done together with the design of the ...
  • Sampath, BG; Wijesiri, NRAAR; Pitahawatte, JMLMGB; Dassanayake, VPC [Conference-Full-text]
    This paper presents the design, analysis and testing of a control system for a quadrotor. The research is done together with the were focused on the maneuverability of the quadrotor hence the mechanical design design ...
  • Adikari, AAMT; Munasinghe, RGNDS; Jayatileke, S [Conference-Full-text]
    Corrosion of metals makes a large impact on the economy of a ountry. Therefore, it is important to take remedial actions to prevent structures, machinery and vehicles from corrosion. Among the various types of corrosion ...
  • Adikari, AAMT; Munasinghe, RGN De S; Jayatiieke, S [Conference-Full-text]
    Corrosion of metals makes a large impact on the remedial actions to prevent structures, corrosion the corrosion that economy of a country. Therefore, it is important machinery and vehicles from corrosion. Among the ...
  • Muthugala, VV; Pathirana, NPDS; Nanayakkara, WHKP; Nanayakkara, NPDCD; Hemapala, KTMU [Conference-Abstract]
    This paper deals with the implementation of a single phase laboratory scale micro grid (MG) including a control system based on emulated energy resources and loads which permits the experimentation of various scenarios. ...
  • Priyadarshana, TGP; Wijethunge, HMDP; Jayasekara, BCCP; Amarasinghe, YWR [Conference-Full-text]
    This paper is focused on designing and optimization of a Micro Electro Mechanical System (MEMS) based piezoresistive type pressure sensor to enhance the sensitivity by optimally utilizing the maximum available Silicon wafer ...
  • Priyadarshana, TGP; Wijethunge, HMDP; Jayasekara, BCCP; Amarasinghe, YWR [Conference-Full-text]
    This paper is focused on designing and optimization of a Micro Electro Mechanical System (MEMS) based piezoresistive .t ype pressure 10 enhance the sensitivity by optimally utilizing the maximum available Silicon wafer ...
  • Welgama, WPD; Gray, HA; Amarasinghe, YWR; Wijeyaratne, SM; Sugathapala, AGT [Conference-Extended-Abstract]
    The purpose of this research was to develop a clinically validated portable NPWT device with low power consumption features. A new NPWT device having dimension of 30 cmy'20 cm x / 5cm (Length x Width x Hight) was clinically ...
  • Welgama, WPD; Gray, HA; Amarasinghe, YWR; Wijeyaratne, SM; Sugathapala, AGT [Conference-Full-text]
    The purpose of this research was to develop a clinically validated portable NPWT device with low power consumption features. A new NPWT device having dimension of 30 cm x20 em <licm (Length x Width x Hight) was clinically ...
  • Upendra, RAS; Kaluarrachchi, P; Weerasekara, KMRD; Ratnayake, VS [Conference-Full-text]
    The paper includes a methodology to calculate the fabric laying and cutting times for a cutting department of an apparel manufacturing company. The methodology was developed based on the data collected for woven trouser ...
  • Balasooriya, MC; Athukorala, DMA; Sanjaya, MGC; Mayura, S; Niles, SN; Abeysooriya, RP [Conference-Full-text]
    This study focuses on the development of a comprehensive fabric quality grading system for selected end uses. This system goes beyond currently existing methods by reflecting the suitability of a candidate fabric for a ...
  • Wijayapala, UGS; Dharmasena, DKAS; Bandara, DMN; Chathuranga, MAI; Rajapakshe, KS [Conference-Full-text]
    Scouring is one of the most important processes in fabric formation in the textile industry. The main function of scouring is the removal of hydrophobic impurities in fabrics made out of natural fibers. Normally scouring ...
  • Jayathilake, DSP; Herath, HMST; Wimalasooriya, RDDP; Karunarathne, SDJ; Weerawardhane, S [Conference-Full-text]
    The traditional knowledge based approach is not a feasible choice to be utilized in information retrieval in domains such as Geographic Information Systems (GIS), because accurate information of geographic data is ...
  • Jayathilake, DSP; Herath, HMST; Wimalasooriya, RDDP; Karunarathne, SDJ; Weerawardhane, S [Conference-Full-text]
    such as Geographic Information Systems (CIS), because accurate information of geographic data a spat,ally distributed and vast in volume. The challenge is to improve the process of information retrieval, which can be ...
  • Herath, HMTC; Fernando, KNJ; Karannagoda, EL; Karunarathne, WMID; De Silva, NHN; Perera, AS [Conference-Full-text]
    Ever growing knowledge bases of enterprises present the demanding challenge of proper organization of information that would enable fast retrieval of related and intended information. Document repositories of enterprises consist ...