Abstract:
Though paper is still the most common substrate in the printing industry, polymeric substrates are becoming common by the day. Commercially available polymers such as polyethylene terephthalate (PET), polyvinyl chloride (PVC) and polypropylene (PP) surfaces have lower density of polar functional groups. Thus, the adhesion characteristics of these materials are naturally poor. Consequently, producing a quality print on such polymer substrates has become a challenge. Hence, surface modification has become a necessity for such surfaces. This study investigates the technical viability of cold plasma-based surface treatment technologies on polymeric materials. The effect of plasma pre-treatment, on the printability of PET substrates, was studied. The surfaces of these polymer substrates were subjected to different cold plasma treatments, using 80% N2 and 20% O2 as feed gas. The study covers the effect of the plasma dose and the plasma intensity on the printability and the degree of surface modification. The study determined the optimum plasma conditions for quality and durable prints.
